---
title: Configure wireless LAN settings
description: "**NOTE** AI Edge Gateway (amnimo X serie…"
url: "https://manual.amnimo.com/docs/advanced-settings/configure-wireless-lan-settings/"
updated: "2024-08-06"
category: 旧GUI / 詳細設定
---

# Configure wireless LAN settings

**NOTE**

AI Edge Gateway (amnimo X series), Edge Gateway (amnimo G series), IoT Router (amnimo R series) and Compact Router Indoor Type (AC10) do not have this function.

This section describes the operations for adding, editing, and deleting new wireless LAN settings.

### Configure WPS

View and change WPS settings.

 **NOTE**

- WPS can be used to connect a compact router with wireless LAN when it is operating in "Access Point Mode". It cannot be used to connect to other access points in "Station Mode.
- When using the "PIN code method," a pre-generated PIN code must be entered at the station connected to the wireless LAN compact router.

   

  On the side menu, click Advanced Settings and Controls - Wireless LAN Settings.

![](https://manual.amnimo.com/wp-content/uploads/2024/07/G0707-01-1024x481.png)

The "Wireless LAN Settings" screen appears.

   The PIN code of the access point is displayed.

\[Click Generate to regenerate the PIN code.

![](https://manual.amnimo.com/wp-content/uploads/2024/07/G0707-02-1024x256.png)

   Click the \[ WPS Settings \] toggle to enable or disable.

If necessary, the use of "WPS switch" or "external PIN code input" can be restricted.

![](https://manual.amnimo.com/wp-content/uploads/2024/07/G0707-03-1024x408.png)

 **NOTE**

Refer to the " [amnimo C Series Compact Router Startup Guide](https://amnimo.com/manual/edge_gw/sg/ja/compact_router_sg.pdf) " for information on how to connect using WPS.

### Display a list of access point settings

Displays a list of access point settings.

  Click on the "Access Points" tab.

A list of registered access point settings is displayed.

 **NOTE**

The factory-installed compact router with wireless LAN starts operating as a wireless LAN access point as soon as it is connected to the Internet The two default values for the SSID name are

- amnimo-2g-xxxxxxxx
- amnimo-5g-xxxxxxxx

![](https://manual.amnimo.com/wp-content/uploads/2024/07/G0707-04-1024x383.png)

### Add access point settings

Add access point settings.

  Click the \[ Add New \] button.

![](https://manual.amnimo.com/wp-content/uploads/2024/07/G0707-05-1024x352.png)

   Enter the necessary items for access point settings.

❶ Enter the access point name.
Click the ❷ toggle to enable.
❸ Select the frequency band.

![](https://manual.amnimo.com/wp-content/uploads/2024/07/G0707-06-1024x273.png)

❹ Enter the SSID, authentication method, and passphrase.

![](https://manual.amnimo.com/wp-content/uploads/2024/07/G0707-07-1024x203.png)

❺ Check SSID stealth, quarantine function, and MAC address filter if necessary.

![](https://manual.amnimo.com/wp-content/uploads/2024/07/G0707-08-1024x115.png)

❻ If necessary, specify the MAC addresses to be allowed to connect.

![](https://manual.amnimo.com/wp-content/uploads/2024/07/G0707-09-1024x154.png)

❼ Check \[Advanced Settings\] for even more detailed settings.

![](https://manual.amnimo.com/wp-content/uploads/2024/07/G0707-10-1024x584.png)

  After completing the settings, click on "Settings".

![](https://manual.amnimo.com/wp-content/uploads/2024/07/G0707-11-1024x213.png)

### Edit access point settings

Edit the registered access point settings.

  Click \[...\] to the right of the access point setting you wish to edit and select \[ Edit \] from the operation menu that appears.

![](https://manual.amnimo.com/wp-content/uploads/2024/07/G0707-12-1024x405.png)

The "Edit Access Point Settings" screen appears.

  Edit the access point settings and click the Configure button. **NOTE**

Compact routers with wireless LAN have the br0 DHCP server enabled by default, which prevents changing the interface used by br0. Since wlan0 is also used as the br0 interface, it is not possible to change the following access points used by wlan0.

- amnimo-2g-xxxxxxxx
- amnimo-5g-xxxxxxxx

Before editing access point settings, set br0 to disabled from the DHCP server settings screen. See " [Editing DHCP Server Settings](https://manual.amnimo.com/en/docs/gui-users-manual-en/advanced-settings/configure-dhcp-server-settings/#dhcp%E3%82%B5%E3%83%BC%E3%83%90%E3%83%BC%E8%A8%AD%E5%AE%9A%E3%82%92%E7%B7%A8%E9%9B%86%E3%81%99%E3%82%8B) " for information on editing DHCP server settings.

![](https://manual.amnimo.com/wp-content/uploads/2024/07/G0707-11-1024x213.png)

Information on access point settings is updated and a list is displayed.

### Delete access point settings

To delete registered access point settings, you can either delete them individually from the access point settings operation menu, or you can delete them after selecting all the access point settings you wish to delete.

#### Delete individual access point settings

This method is to select Delete from the operation menu of the access point settings.

  Click \[...\] to the right of the access point setting you wish to delete and select \[ Delete \] from the operation menu that appears.

![](https://manual.amnimo.com/wp-content/uploads/2024/07/G0707-13-1024x405.png)

The "Confirmation" screen appears.

  ［Click the Delete button.

![](https://manual.amnimo.com/wp-content/uploads/2024/07/G0707-14-1024x535.png)

Access point settings are deleted.

#### Selecting and deleting multiple access point settings

This method is used to delete access point settings after checking the check boxes for the access point settings you wish to delete. This is useful for deleting multiple access point settings at once. You can also select a single access point setting to delete.

   Click the checkbox to the left of the access point setting you wish to delete, place a checkmark in the checkbox, and click the \[ Delete \] button.

![](https://manual.amnimo.com/wp-content/uploads/2024/07/G0707-15-1024x403.png)

The "Confirmation" screen appears.

  ［Click the Delete button.

![](https://manual.amnimo.com/wp-content/uploads/2024/07/G0707-14-1024x535.png)

The selected access point setting is deleted.

### View a list of station settings

Displays a list of station settings.

  Click on the "Stations" tab. **NOTE**

The factory-installed compact router with wireless LAN starts operating as a wireless LAN access point immediately after power-on, so no station settings are registered.
To operate in station mode, several steps must be taken. Please refer to the " [amnimo C Series Compact Router Startup Guide](https://amnimo.com/manual/edge_gw/sg/ja/compact_router_sg.pdf) " for detailed instructions.

![](https://manual.amnimo.com/wp-content/uploads/2024/07/G0707-16-1024x352.png)

A list of registered station settings is displayed.

### Adding station settings

Add station settings.

  ［Click the Add New button.

![](https://manual.amnimo.com/wp-content/uploads/2024/07/G0707-17-1024x352.png)

  Enter the items required for station setup.

❶ Enter the station name.
Click the ❷ toggle to enable.

![](https://manual.amnimo.com/wp-content/uploads/2024/07/G0707-18-1024x205.png)

❸ Enter the SSID, authentication method, and passphrase. Set the user name and password.

![](https://manual.amnimo.com/wp-content/uploads/2024/07/G0707-19-1024x202.png)

❹ Checking the \[Advanced Settings\] checkbox allows for even more detailed settings.

![](https://manual.amnimo.com/wp-content/uploads/2024/07/G0707-20-1024x522.png)

  After completing the settings, click on "Settings".

![](https://manual.amnimo.com/wp-content/uploads/2024/07/G0707-21-1024x205.png)

### Edit Station Settings

Edit registered station settings.

   Click \[...\] to the right of the station setting you wish to edit and select \[ Edit \] from the menu of operations that appears.

![](https://manual.amnimo.com/wp-content/uploads/2024/07/G0707-22-1024x401.png)

The Edit Station Settings screen appears.

  Edit the station settings and click the Configure button.

![](https://manual.amnimo.com/wp-content/uploads/2024/07/G0707-23.png)

Information on station settings will be updated and a list will be displayed.

### Delete station settings

To delete registered station settings, you can either delete them individually from the station settings operation menu, or you can delete them after selecting all the station settings you wish to delete.

#### Delete individual station settings

This method is to select Delete from the operation menu of the station setup.

  Click \[...\] to the right of the station setting you wish to delete and select \[ Delete \] from the operation menu that appears.

![](https://manual.amnimo.com/wp-content/uploads/2024/07/G0707-24-1024x401.png)

The "Confirmation" screen appears.

  Click the \[ Delete \] button.

![](https://manual.amnimo.com/wp-content/uploads/2024/07/G0707-25-1024x525.png)

Station settings are deleted.

#### Delete multiple selections of station settings

This method is used to check the station settings you wish to delete before deleting them. This is useful for deleting multiple station settings at once. You can also select a single station setting to delete.

  Click the checkbox to the left of the station setting you wish to delete, place a checkmark in the checkbox, and click the \[ Delete \] button.

![](https://manual.amnimo.com/wp-content/uploads/2024/07/G0707-26-1024x404.png)

The "Confirmation" screen appears.

  ［Click the Delete button.

![](https://manual.amnimo.com/wp-content/uploads/2024/07/G0707-27-1024x586.png)

The selected station settings will be deleted.