---
title: Reboot the AI Edge Gateway
description: AI Edge Gateways can be rebooted by comm…
url: "https://manual.amnimo.com/docs/ai-edge-gateway-deployment-and-operation-ax-individual-guide-en/reboot-3/"
updated: "2025-02-06"
category: AX個別 / AI エッジゲートウェイの導入と運用（AX個別ガイド）
---

# Reboot the AI Edge Gateway

AI Edge Gateways can be rebooted by command operation.

There are two types of reboots: software reboot, which stops the system, and hardware reboot, which does not stop the system.

⇒For details on the CLI (Command Line Interface) for using commands, please refer to "Chapter 1 CLI Basics" in the " [CLI User's Manual](https://amnimo.com/manual/edge_gw/cli/ja/cli_users_manual.pdf) ".
⇒Refer to "2.1 Rebooting the Product" in the " [CLI User's Manual](https://amnimo.com/manual/edge_gw/cli/ja/cli_users_manual.pdf) " for details on rebooting the AI Edge Gateway with the dedicated CLI.

 **NOTE**

To reboot the AI Edge Gateway, the sudo command must be used.

### Software reboot

Software reboot after system shutdown.

#### Execution example

Below is an example of running the command in bash.

admin@amnimo:~$ sudo amctrl reboot -t soft
Are you sure you want to restart? (y/n): ← "y" key followed by Enter

 **NOTE**

To reboot the AI Edge Gateway, the sudo command must be used.

### Hardware reboot

Without shutting down the system, power off the hardware and reboot.

#### Execution example

Below is an example of running the command in bash.

admin@amnimo:~$ sudo amctrl reboot -t hard
Are you sure you want to restart? (y/n): ← "y" key followed by Enter

 **NOTE**

To cancel execution of the command, type the "n" key followed by Enter.

 **CAUTION**

Performing a hardware reboot may result in file system corruption.