---
title: Update the firmware of the AI Edge Gateway
description: There are two ways to update the firmwar…
url: "https://manual.amnimo.com/docs/ai-edge-gateway-deployment-and-operation-ax-individual-guide-en/update-firmware-4/"
updated: "2025-02-17"
category: AX個別 / AI エッジゲートウェイの導入と運用（AX個別ガイド）
---

# Update the firmware of the AI Edge Gateway

There are two ways to update the firmware of the AI Edge Gateway: through the SIM card or through the network.

All of the following operations are performed by command.

⇒For details on the CLI (Command Line Interface) for using commands, see "Chapter 1 CLI Basics" in the [CLI User's Manual](https://amnimo.com/manual/edge_gw/cli/ja/cli_users_manual.pdf).

### Update firmware over the network

Update firmware by specifying firmware on the network.

   AIエッジゲートウェイのネットワークを設定します。

![](https://manual.amnimo.com/wp-content/uploads/2024/08/画像8-1-1024x407.png)

The initial IP address setting on the wan0 side is fixed to the DHCP client. Please set it according to the network such as ONU (optical line terminating unit) on the Internet side.

⇒For details on how to change the network, see "6.2 Configuring Interface Settings" in the [CLI User's Manual](https://amnimo.com/manual/edge_gw/cli/ja/cli_users_manual.pdf).

⇒For details on mobile settings, please refer to "Chapter 5 Mobile Operations" in the [CLI User's Manual](https://amnimo.com/manual/edge_gw/cli/ja/cli_users_manual.pdf).

  Log in with amsh and enter administrator mode.

⇒For details, see "1.2 Starting the Product's CLI" in the [CLI User's Manual](https://amnimo.com/manual/edge_gw/cli/ja/cli_users_manual.pdf).

  Check the firmware file. **NOTE**

In order to retrieve the firmware, the following information is required: "connection and firmware", "account name", and "password".
The URL for the latest firmware used in the example run of this procedure is You must have the correct firmware for the version you are using.

- AI Edge Gateway (indoor version)
  https:// (account name):(password)@package.amnimo.com/firmware/ax11.amf
- AI Edge Gateway (outdoor version)
  https:// (account name):(password)@package.amnimo.com/firmware/ax21.amf

Please contact our support separately for account and password information.

```
amnimo# firmware file check https://username:password@package.amnimo.com/firmware/ax11.amf
Downloading... ######################################################################### 100.0%
version:  amnimo X series AX version 2.6.0 build 64505
contents: rootfs
```

⇒For details, see "2.4.2 Checking Firmware Files" in the [CLI User's Manual](https://amnimo.com/manual/edge_gw/cli/ja/cli_users_manual.pdf).

  Update firmware files.

Update the firmware file configured in step 3.

```
amnimo# firmware area update
reboot to update? (y/n):                         ←「y」キーに続けてEnterを入力
```

⇒For details, see "2.4.4 Updating Firmware" in the [CLI User's Manual](https://amnimo.com/manual/edge_gw/cli/ja/cli_users_manual.pdf).

AI Edge Gateway reboots.

  Check the updated version.

```
amnimo# show firmware 
amnimo X series AX11 version 2.6.0 build 64505
Kernel: 5.10.83-cip1-00925-g23eba26b0521 #1 SMP PREEMPT Mon Jun 3 08:08:12 UTC 2024
Bootloader: U-Boot 2021.10 (Jul 24 2024 - 01:33:28 +0000) for RZ/V2MA Linux Package V1.1.0
BootArea: 1
Partitions: 3
```

⇒For details, see "2.4.1 Displaying the Firmware Version" in the [CLI User's Manual](https://amnimo.com/manual/edge_gw/cli/ja/cli_users_manual.pdf).