---
title: View All Steps
description: "Common to all functions, there is a \"Sho…"
url: "https://manual.amnimo.com/docs/basic_operations-gui/view-all-steps/"
updated: "2025-10-03"
category: GUI ユーザーズマニュアル（FW v3.2.0 以降） / 基本操作（GUI）
---

# View All Steps

Common to all functions, there is a "Show All Steps" toggle on the Add/Edit Settings page.
Normally, the screen switches for each Step, but by enabling this feature, all Steps can be displayed on the screen for operation.

![](https://manual.amnimo.com/wp-content/uploads/2025/09/GU0003-01-1-1024x333.webp)

## ［Screen when [Show All Steps] is enabled.

  ［Click on the "Show All Steps" toggle to enable it.

![](https://manual.amnimo.com/wp-content/uploads/2025/09/GU0003-02-2-1024x138.webp)

All steps required for setup will be displayed.

![](https://manual.amnimo.com/wp-content/uploads/2025/09/GU0003-03-1024x742.webp)

 **NOTE**

［The "Confirmation" step that was present when "Show All Steps" was deactivated is no longer present.

![](https://manual.amnimo.com/wp-content/uploads/2025/09/GU0003-04-1024x453.webp)

   ［Click Settings to add or edit settings.

As described in the NOTE in Step 1, the "Confirmation of Input" step is eliminated, so clicking on "Setup" will be executed immediately.

![](https://manual.amnimo.com/wp-content/uploads/2025/09/GU0003-05-1024x741.webp)