---
title: About power supply connection
description: "![](https://manual.amnimo.com/wp-content…"
url: "https://manual.amnimo.com/docs/compact-router-outdoor-type-with-wireless-lan/about-power-supply-connection-2/"
updated: "2024-07-19"
category: 屋外タイプ設置ガイド / 無線LAN搭載コンパクトルーター 屋外版（屋外タイプ設置ガイド）
---

# About power supply connection

![](https://manual.amnimo.com/wp-content/uploads/2024/06/image028-1024x640.jpg)

  **Memo**

- For power supply connection, connect 100 VAC (L side and N side) and FG (frame ground) as shown above.
- The FG mark and the L side are clearly marked near the connector.
- FG must be connected, otherwise accidents or malfunctions may occur.
- Please be very careful not to touch these terminals with metal or your body by mistake.
- After connecting the power supply, work in such a way that the power supply to the equipment can be cut off by installing an NFB (wiring circuit breaker) on the AC100V power line.
- After connecting the power supply, attach terminal caps to the terminal block.