---
title: Set up the camera for authentication and start of use.
description: Click ︙ on the detected camera and click…
url: "https://manual.amnimo.com/docs/configure-the-enhanced-video-management-system/set-up-the-camera-for-authentication-and-start-of-use/"
updated: "2024-07-18"
category: "AX-SG / Configure the enhanced video management system."
---

# Set up the camera for authentication and start of use.

Click ︙ on the detected camera and click General Settings.

![](https://manual.amnimo.com/wp-content/uploads/2024/07/image-141.png)

  \[Click "Settings" under "Camera Credentials.

![](https://manual.amnimo.com/wp-content/uploads/2024/07/image-142.png)

  After entering the user name and password, click "Setup" to close the window.

\*Please enter the user name and password that you set yourself during the initial setup of the camera.

![](https://manual.amnimo.com/wp-content/uploads/2024/07/image-143.png)

  Select the added camera and click on the DIRECT tab to confirm that the video is displayed.

![](https://manual.amnimo.com/wp-content/uploads/2024/07/image-144.png)