---
title: Reboot.
description: The IoT router can be rebooted by comman…
url: "https://manual.amnimo.com/docs/deployment-and-operation-of-iot-routers/reboot-4/"
updated: "2024-09-11"
category: AR個別 / IoT ルーターの導入と運用（AR個別ガイド）
---

# Reboot.

The IoT router can be rebooted by command operation.

There are two types of reboots: software reboot, which stops the system, and hardware reboot, which does not stop the system.

- For more information on the Command Line Interface (CLI) for using commands, see "Chapter 1 CLI Basics" in the [CLI User's Manual](https://amnimo.com/manual/edge_gw/cli/ja/cli_users_manual.pdf).
- To reboot using the IoT Router's dedicated CLI, please refer to "2.1 Rebooting the Product" in the " [CLI User's Manual](https://amnimo.com/manual/edge_gw/cli/ja/cli_users_manual.pdf) " of

 **NOTE**

To reboot the IoT router, the sudo command must be used.

### Reboot the software

Software reboot after system shutdown.

#### Execution example

Below is an example of running the command in bash.

```
admin@amnimo:~$ sudo amctrl reboot -t soft
Are you sure you want to restart? (y/n):            ←「y」キーに続けてEnterを入力
```

 **NOTE**

To reboot the IoT router, the sudo command must be used.

### Perform a hardware reboot

Without shutting down the system, power off the hardware and reboot.

#### Execution example

Below is an example of running the command in bash.

```
admin@amnimo:~$ sudo amctrl reboot -t hard
Are you sure you want to restart? (y/n):            ←「y」キーに続けてEnterを入力
```

 **NOTE**

To cancel execution of the command, type the "n" key followed by Enter.

 **WARNING**

Performing a hardware reboot may result in file system corruption.