---
title: When using PF pipe connectors
description: "### necessities | PF pipe connector with…"
url: "https://manual.amnimo.com/docs/edge-gateway-outdoor-type/when-using-pf-pipe-connectors-3/"
updated: "2024-07-19"
category: 屋外タイプ設置ガイド / AIエッジゲートウェイ 屋外版 / エッジゲートウェイ 屋外版（屋外タイプ設置ガイド）
---

# When using PF pipe connectors

### necessities

| PF pipe connector with verified connection \* Not sold by Amnimo |
| --- |
| Furukawa Electric: PFS-16KSR-I (IPX5 compliant product) [https://www.furukawa.co.jp/eflex/product/plafleky/p_pfbkr.htm](https://www.furukawa.co.jp/eflex/product/plafleky/p_pfbkr.htm) |
| Miraikogio: FPK16YPS (IPX7 compliant product) [https://www.mirai.co.jp/densetu/pdf-catalog_2021/6000221.pdf](https://www.mirai.co.jp/densetu/pdf-catalog_2021/6000221.pdf) |

### Installation Instructions

    Remove the grommet.

![](https://manual.amnimo.com/wp-content/uploads/2024/06/image012-1024x563.png)

  Use the body and washers from the outside and the lock nuts from the inside in the holes where the grommets were removed, and tighten and secure the box firmly with torque between them. **Memo**

There is no manufacturer's recommended tightening torque for both PF pipe connectors.

![](https://manual.amnimo.com/wp-content/uploads/2024/06/image016.png)

  Pass the power cable and LAN cable through the PF tube and connect them to the PF tube connector. **Memo**

It is not possible to pull out all the wires using only the standard holes. Additional hole machining may be required, so please consult your Amnimo sales representative prior to purchase.

![](https://manual.amnimo.com/wp-content/uploads/2024/06/image017.png)

  Wiring process.

See [Internal Wiring and Wiring Handling](https://manual.amnimo.com/en/docs/outdoor-type-installation-guide/edge-gateway-outdoor-type/internal-wiring-and-wiring-treatment/).