---
title: About factory default settings
description: This section describes the factory defau…
url: "https://manual.amnimo.com/docs/edge-gateway-product-overview-ag-individual-guide/about-factory-default-settings/"
updated: "2025-12-02"
category: AG個別 / エッジゲートウェイの製品概要（AG個別ガイド）
---

# About factory default settings

This section describes the factory default settings for the Edge Gateway.

### network

eth0: dhcpv4
lan0:
lan1:
lan2:
lan3:
br0: 192.168.0.254/24
 - lan0/lan1/lan2/lan3

### Initial Account

- ID: admin
- PW: No setting (set at first login)

### initial host name

- amnimo

### Server Settings

| server | setting (of a computer or file, etc.) |
| --- | --- |
| SSH Server | invalid |
| DHCP Server | invalid |
| DNS Server | **validity**^1 |
| IPsec | invalid |
| NTP Server | invalid |
| Syslog server (local storage) | **validity** |
| Syslog server (forwarding) | invalid |
| NxWtiness Server | **validity** |
| Device Management System Server | **validity** |
| GUI (HTTP server) | **Valid^^1\*2** |
| remote.it | invalid |

1 If your gateway's FW is v1.1.2 or earlier, the default DNS server setting is disabled and there is no GUI functionality.
2 If your gateway's FW is v3.4.0 or later, the default setting of the GUI server is HTTPS.

 **NOTE**

The firmware version can be checked using the CLI and GUI functions. See below for details.

- [CLI User's Manual](https://amnimo.com/manual/edge_gw/cli/ja/cli_users_manual.pdf) "2.4.1 Displaying the Firmware Version"
- GUI User's Manual ["Dashboard" > Firmware](https://manual.amnimo.com/en/docs/gui-users-manual-fw-v-3-2-0-or-later/screen-view-gui/dashboard-fw-v-3-2-0-or-later/#%E3%83%95%E3%82%A1%E3%83%BC%E3%83%A0%E3%82%A6%E3%82%A7%E3%82%A2)
  GUI User's Manual (FW v.3.1.1 or earlier) ["Checking Device Information"](https://manual.amnimo.com/en/docs/gui-users-manual-en/basic-operation-en-3/check-equipment-information/)

### PoE Configuration

All ports are configured as follows

- Power supply: Enabled
- Startup delay time: 0 sec.
- Current limit: auto

### packet filtering configuration

| Index Number | Port Number | protocol | Description. | From / To | setting (of a computer or file, etc.) | policy |
| --- | --- | --- | --- | --- | --- | --- |
| 100 | 137, 138 | udp | NetBIOS Name Service NetBIOS Datagram Service | destination (of transmission) | transfer | drop |
| 110 | 137, 138 | udp | NetBIOS Name Service NetBIOS Datagram Service | sender | transfer | drop |
| 120 | 137 | tcp | NetBIOS Name Service | destination (of transmission) | transfer | drop |
| 130 | 137 | tcp | NetBIOS Name Service | sender | transfer | drop |
| 140 | 139 | tcp | NetBIOS Session Service | destination (of transmission) | transfer | drop |
| 150 | 139 | tcp | NetBIOS Session Service | sender | transfer | drop |
| 160 | 445 | tcp | Direct Hosting of SMB | destination (of transmission) | transfer | drop |
| 170 | 445 | tcp | Direct Hosting of SMB | sender | transfer | drop |