Network configuration (AB12)

To configure the network settings, a network configuration QR code must be pre-generated and read by the amnimo portable device.

Generate QR code for network configuration

Depending on your network environment, please configure the following settings.

Connecting via wireless LAN
→ To generate a QR code for wireless LAN settings
Connecting via mobile network (using SIM card)
→ To generate a QR code for APN setup

NOTE

If both connection methods are to be used, generate both QR codes and set them up respectively.
(e.g., if you normally use a wireless LAN connection and a mobile network connection when outdoors)

To generate a QR code for wireless LAN setup

Generates a QR code with information on the wireless LAN to which the AMNIMO Portable Device NP is connected.

On a PC, access the following URL

ネットワーク設定用 QR コード生成 URL

https://apps.amnimo.com/video/amp/qrcode/index.html

Set the type to "Wireless LAN" as a common setting.

Set the following items (1) to (4) as the wireless LAN settings, and click [Generate QR Code].

Enter the SSID.
Enter the priority level.
Enter the password.
Select the encryption type.

A QR code for wireless LAN setup is generated.

To generate a QR code for APN setup

Generate the APN information used by the AMNIMO Portable Device NP as a QR code.

On a PC, access the following URL

ネットワーク設定用 QR コード生成 URL

https://apps.amnimo.com/video/amp/qrcode/index.html

Set the type to "LTE" as a common setting.

Set the following items (1) to (4) for the APN profile and click [Generate QR Code].

Enter an arbitrary name for identification.
Enter the APN.
Enter a user name.
Enter the password.
(5) Check [ON] for automatic connection.
(6) Enter the MCC (Mobile Country Code).
(7) Enter the MNC (Mobile Network Code).

NOTE

Please refer to the following for information required for APN profiles.
⇒See " List of SIMs Tested".