---
title: CVR
description: This section describes the operation of …
url: "https://manual.amnimo.com/docs/service-configuration-gui/cvr/"
updated: "2026-01-20"
category: GUI（FW v3.2.0） / サービス設定（GUI）
---

# CVR

This section describes the operation of the "CVR" screen.
Here you can configure the settings for using the Cloud Video Recorder (abbreviated as CVR) with this product.

 **NOTE**

AI Edge Gateways and Sensor Connection Gateways (amnimo X series), Edge Gateways (amnimo G series), and Compact Routers (AC10) do not have this feature.

Click \[Service Settings\] > \[CVR\] in the side menu to open the "CVR Settings" screen.

![](https://manual.amnimo.com/wp-content/uploads/2025/10/GU0910-01-1024x409.webp)

## CVR setting

### Display CVR settings

Open the "CVR Settings" tab to see the current status of the CVR settings.

![](https://manual.amnimo.com/wp-content/uploads/2025/10/GU0910-02-1-1024x329.webp)

### Change CVR settings

Enables/disables the CVR setting.
Below are the steps for activation.

  On the "CVR Settings" tab, click the toggle to enable and click Next.

Enable "CVR Settings" to use CVR.

![](https://manual.amnimo.com/wp-content/uploads/2025/10/GU0910-03-1024x345.webp)

  Confirm the information entered and click "Setup".

![](https://manual.amnimo.com/wp-content/uploads/2025/10/GU0910-04-1024x389.webp)

The CVR setting is changed.

## Camera Settings

### Display camera settings

Open the "Camera Settings" tab to see the current status of the camera settings.

![](https://manual.amnimo.com/wp-content/uploads/2025/10/GU0910-05-1024x461.webp)

### Add camera settings

Camera information can be configured in two ways

- Upload the CVR configuration file
- Add new camera information

#### Upload the CVR configuration file

You can add camera settings by uploading a CVR configuration file.
Please refer to the following for instructions on how to create a configuration file.
[⇒Cloud Video Recorder (For Partners) > Preparing Camera Settings File](https://manual.amnimo.com/docs/cloud-video-recorder-for-partners/camera-setup-file-cvr-partners/%e3%82%ab%e3%83%a1%e3%83%a9%e8%a8%ad%e5%ae%9a%e3%83%95%e3%82%a1%e3%82%a4%e3%83%ab%e3%81%ae%e6%ba%96%e5%82%99/)
\*Customers other than partners can also view the file.

 **WARNING**

If a new configuration file is uploaded while camera settings are already set, the existing camera settings will be deleted and the camera information in the new configuration file will be reflected.

  In the "Camera Settings" tab, click "Browse".

![](https://manual.amnimo.com/wp-content/uploads/2025/10/GU0910-06-1024x319.webp)

  Select a configuration file. **NOTE**

The extension of the configuration file is "json".

![](https://manual.amnimo.com/wp-content/uploads/2024/09/G0606-63-1-1024x446.png)

  ［Click Upload.

![](https://manual.amnimo.com/wp-content/uploads/2025/10/GU0910-07-1-1024x328.webp)

  ［Click Upload.

![](https://manual.amnimo.com/wp-content/uploads/2025/09/GU0910-08.webp)

After the upload of the configuration file is complete, you will be able to check the settings (camera information) on this device.

#### Add a new camera setting

  In the "Camera Settings" tab, click "Add New".

![](https://manual.amnimo.com/wp-content/uploads/2025/10/GU0910-09-1024x337.webp)

  Set the following items (1) to (5) for basic information on camera settings and click Next.

(1) Select the camera manufacturer from the pull-down menu. (Optional)
(2) and (5) are automatically entered according to the selection (excluding "Other").
(2) Enter the camera display name.
(3) Enter the user name.
(4) Enter the password.
(5) Enter the stream URL.
　Add the IP address and port number to the stream path set by the camera manufacturer selection in (1). (Example: 192.168.0.100 **:554/examples** )

![](https://manual.amnimo.com/wp-content/uploads/2025/10/GU0910-10-3-1024x532.webp)

  Confirm the information entered and click "Setup".

![](https://manual.amnimo.com/wp-content/uploads/2025/10/GU0910-11-1024x501.webp)

Adding camera information is completed.

### Editing Camera Information

  Click \[...\] to the right of the camera setting you wish to edit, then click Edit from the menu that appears.

![](https://manual.amnimo.com/wp-content/uploads/2025/10/GU0910-12-1024x338.webp)

  Configure the settings in the "Edit Camera Settings" window and click "Configure" to complete editing of the camera settings.

![](https://manual.amnimo.com/wp-content/uploads/2025/09/GU0910-13-1024x501.webp)

### Delete camera information

There are two ways to delete camera information: individually, one by one, or in batches.

#### Delete individual camera information.

  Click \[...\] to the right of the camera information you wish to delete and select \[Delete\] from the operation menu that appears.

![](https://manual.amnimo.com/wp-content/uploads/2025/10/GU0910-14-1-1024x338.webp)

  ［Click Delete.

![](https://manual.amnimo.com/wp-content/uploads/2025/09/GU0910-15.webp)

The selected camera settings will be deleted.

#### Delete camera information in a batch

  Click the checkbox to the left of the camera information you wish to delete, place a checkmark in the checkbox, and click the \[ Delete \] button.

![](https://manual.amnimo.com/wp-content/uploads/2025/10/GU0910-16-1024x464.webp)

  ［Click Delete.

![](https://manual.amnimo.com/wp-content/uploads/2025/10/GU0910-17.webp)

The selected camera settings will be deleted.