---
title: DMS
description: This section describes the operation of …
url: "https://manual.amnimo.com/docs/service-configuration-gui/dms/"
updated: "2025-12-04"
category: GUI（FW v3.2.0） / サービス設定（GUI）
---

# DMS

This section describes the operation of the "DMS Settings" screen.
Here you will set up to use the Device Management System.

Click \[Service Settings\] > \[DMS\] on the side menu to open the "DMS Settings" screen.

![](https://manual.amnimo.com/wp-content/uploads/2025/07/GU0906-01-1024x310.png)

## Display DMS settings

When the "DMS Settings" screen is opened, the current status of the DMS settings is displayed.

 **ALERT**

To enable smooth device management, the factory default setting for DMS on the device side is " **enabled** ".
Regardless of whether this service is used or not, Internet communication is performed when the DMS setting is enabled. Since communication costs are incurred when using the mobile function, please **disable** the DMS setting if you do not use this service.

![](https://manual.amnimo.com/wp-content/uploads/2025/09/GU0906-02-1024x292.webp)

## Change DMS settings

Enables/disables DMS settings.

  Click the toggle to Enable/Disable and click Next.

![](https://manual.amnimo.com/wp-content/uploads/2025/09/GU0906-03-1024x292.webp)

  Confirm the information entered and click "Setup".

![](https://manual.amnimo.com/wp-content/uploads/2025/07/GU0906-04-1024x372.png)

The DMS settings are changed.