---
title: host name
description: This section describes the operation of …
url: "https://manual.amnimo.com/docs/system-configuration-gui/host-name/"
updated: "2025-10-03"
category: GUI（FW v3.2.0） / システム設定（GUI）
---

# host name

This section describes the operation of the "Host Name Settings" screen.

Click \[System Settings\] > \[Host Name\] on the side menu to open the "Host Name Settings" screen.

![](https://manual.amnimo.com/wp-content/uploads/2025/07/GU0801-01-1024x320.png)

## Host Name Setting

Set the host name of the device.
The host name set here will be displayed as "Host Name" in the upper right corner of the screen.

![](https://manual.amnimo.com/wp-content/uploads/2025/09/GU0801-04-1024x122.webp)

  Enter a host name in the "Host name to configure" field and click Next. **ホスト名について**

- Max. 32 characters
- Characters that can be set are alphanumeric characters (case-sensitive), symbols (. (dot) cannot be used at the beginning or the end, and - (hyphen) cannot be used at the beginning.)
- Default is "amnimo" (if not entered, it will be automatically set to "amnimo").

![](https://manual.amnimo.com/wp-content/uploads/2025/07/GU0801-02-1024x320.png)

  Confirm the information entered and click "Setup".

![](https://manual.amnimo.com/wp-content/uploads/2025/07/GU0801-03-1024x378.png)

Host name configuration is completed.