Choose “Save as PDF” as the destination to download this doc.

Back to the doc
amnimo Manual Library

Configure multiple devices at once

便利な機能（デバイス管理システム）  ·  https://manual.amnimo.com/docs/useful-features/configure-multiple-devices-at-once/

Up to 50 devices can be operated together. This page describes how to operate the following

注意

When devices are assigned fixed IP addresses in an environment that does not use DHCP, distributing the same configuration file to multiple devices may cause IP address conflicts (collisions), resulting in network failures.
If you have set a static IP address for the device, log in directly to the device and change the device settings.

Distribute configuration files in bulk

  1. In the device list, check the devices whose settings you wish to update, and click Configuration File Distribution.

  2. [Click Upload.
    If you have already uploaded the file, go to Step 4.

  3. Select a file and click Upload.

  4. Select the file and click Confirm.

  5. [Click Update.

  6. From the device edit screen, confirm that the configuration changes have been completed.

Perform batch firmware differential updates

Here is how to update the diffs for multiple devices at once.

  1. In the device list, check the devices for which you want to update the firmware, and click on "Firmware Update" and then "FW Differential Update".

  2. [Click Update.

  3. Check the firmware version and confirm that the update is complete.

Update the entire firmware in one batch.

Learn how to update the firmware of multiple devices at once.

  1. In the device list, check the devices for which you want to update the firmware, and click "Update FW" from "Update Firmware".

  2. [Click Upload.
    If you have already uploaded the file, go to Step 4.

  3. Select the firmware image file and click Upload.


    ＜ About firmware image files
    Go to the following URL to download the firmware image file
    An account name and password are required to access the site. If you do not know your account name and password, please contact Support.
    *If you are using a browser, please use a browser that can access FTP, such as Internet Explorer.

    ▼ Edge Gateway latest firmware image files
    ftp://(account name):(password)@package.amnimo.com/firmware/ag10.amf

    ▼ IoT Router latest version firmware image file
    ftp://(account name):(password)@package.amnimo.com/firmware/ar10.amf

    If you would like to download past firmware image files, please refer to the FAQ below.
    https://support.amnimo.com/hc/ja/articles/360053300174
  4. Select the file and click Confirm.

  5. Select the update surface and click Confirm.

  6. [Click Update.

  7. Check the firmware version and confirm that the update is complete.
    The device will automatically reboot after the update is complete. After rebooting, confirm that the device has returned to normal operation.