---
title: Configure DNS settings
description: "Configure DNS settings for this product. This section describes operations such as enabling DNS settings, specifying port numbers, and adding a query server. ## View DNS settings Displays DNS settings. From the side menu, click Advanced Settings & Controls -…"
url: "https://manual.amnimo.com/en/docs/advanced-settings/configure-dns-settings/"
updated: "2024-08-09"
category: GUI / Advanced Settings
---

# Configure DNS settings

Configure DNS settings for this product.
This section describes operations such as enabling DNS settings, specifying port numbers, and adding a query server.

## View DNS settings

Displays DNS settings.

  From the side menu, click Advanced Settings & Controls - DNS Settings.

The "DNS Settings" screen displays the registered DNS settings.

![](https://manual.amnimo.com/wp-content/uploads/2024/07/G0714-01-1024x551.png)

 **NOTE**

You can sort the DNS settings in descending/ascending order for each item by clicking the "Address" and "Priority" tabs for the query server and local address of the DNS settings.

![](https://manual.amnimo.com/wp-content/uploads/2024/07/G0714-02-1024x108.png)

## Configure DNS settings

Configure DNS settings.

  On the "DNS Settings" screen, set the following items (1) to (3) and click the "Configure" button.

Click the ❶ toggle to enable or disable DNS.
❷ Specify the port number.
❸ Select to enable or disable querying the root server.

![](https://manual.amnimo.com/wp-content/uploads/2024/07/G0714-03-1024x255.png)

This is applied by clicking on the \[ Settings \] button.

### Configure the query server settings.

  Select the "Query Server" tab and click Add New.

![](https://manual.amnimo.com/wp-content/uploads/2024/07/G0714-04-1024x480.png)

The "Add Contact Server" screen will appear.

  Set the following items (1) to (2) and click the \[ Settings \] button.

Specify the upper-level DNS server to query.
❷ Specify the priority as a number from 0 to 99, with 0 being the highest priority.

![](https://manual.amnimo.com/wp-content/uploads/2024/07/G0714-05-1-1024x335.png)

From the DNS Settings screen, you can edit or delete the configured query server.

![](https://manual.amnimo.com/wp-content/uploads/2024/07/G0714-06-1024x503.png)

### Configure local address settings.

  Select the "Local Address" tab and click on "Add New".

![](https://manual.amnimo.com/wp-content/uploads/2024/07/G0714-07-1024x486.png)

The "Add Local Address" screen appears.

  Set the following items (1) to (3) and click the \[ Setup \] button.

❶ Specifies the address to be responded to.
❷ Specifies the host name to respond to.
❸ Set the TTL value to be returned upon response, as a number between 10 and 2419200.

![](https://manual.amnimo.com/wp-content/uploads/2024/07/G0714-08-1024x380.png)

From the DNS Settings screen, you can edit or delete the local address you have set.

![](https://manual.amnimo.com/wp-content/uploads/2024/07/G0714-09-1024x500.png)

### Configure local zone settings.

  Select the "Local Zones" tab and click on "Add New.

![](https://manual.amnimo.com/wp-content/uploads/2024/07/G0714-10-1024x478.png)

The "Add Local Zone" screen will appear.

  Set the following ① to ② and click the \[ Setup \] button.

❶ Enter any zone name.
Specify the type of ❷.

![](https://manual.amnimo.com/wp-content/uploads/2024/07/G0714-11-1024x341.png)

From the DNS Settings screen, you can edit or delete configured local zones.

![](https://manual.amnimo.com/wp-content/uploads/2024/07/G0714-12-1024x504.png)

### Set up an alias definition.

  Select the "Alias Definition" tab and click Add New.

![](https://manual.amnimo.com/wp-content/uploads/2024/07/G0714-13-1024x472.png)

The "Add Alias Definition" screen appears.

  Set the following items (1) to (3) and click the \[ Setup \] button.

❶ Enter any domain name.
Specify the host name.
❸ Set the TTL value to be returned upon response, as a number between 10 and 2419200.

![](https://manual.amnimo.com/wp-content/uploads/2024/07/G0714-14-1024x408.png)

From the DNS Settings screen, you can edit or delete the alias definitions you have set.

![](https://manual.amnimo.com/wp-content/uploads/2024/07/G0714-15-1024x521.png)