---
title: Configure mobile communication settings
description: "**NOTE** Devices without communication modules do not have this function. This section describes how to add, edit, and delete new mobile communication settings. ### View a list of mobile communication settings Displays a list of mobile communication settings. On the…"
url: "https://manual.amnimo.com/en/docs/advanced-settings/configure-mobile-communication-settings/"
updated: "2024-08-06"
category: GUI / Advanced Settings
---

# Configure mobile communication settings

**NOTE**

Devices without communication modules do not have this function.

This section describes how to add, edit, and delete new mobile communication settings.

### View a list of mobile communication settings

Displays a list of mobile communication settings.

  On the side menu, click Settings & Controls - Mobile Communication Settings.

![](https://manual.amnimo.com/wp-content/uploads/2024/07/G0706-01-1024x383.png)

A list of registered mobile communication settings is displayed on the "Mobile Communication Settings" screen.

 **NOTE**

By clicking tabs such as "Mobile Line Name," "Session Name," and "Priority" in the Mobile Communication Settings list, you can sort the mobile communication settings in descending/ascending order for each item.

![](https://manual.amnimo.com/wp-content/uploads/2024/07/G0706-02-1024x274.png)

### Add mobile communication settings

Add a new mobile communication setting.

   On the "Mobile Communication Settings" screen, click the [ Add New ] button.

![](https://manual.amnimo.com/wp-content/uploads/2024/07/G0706-03-1024x380.png)

The "Add Mobile Communication Settings" screen will appear.

  Set the following items (1) to (3) and click the [ Setup ] button.

❶ Enter the name of the mobile line.
❷ Select the message output level.
❸ If necessary, select enable/disable for fail-safe and set the number of retries and reboots.

![](https://manual.amnimo.com/wp-content/uploads/2024/07/G0706-04-1024x518.png)

After completing the settings, click on "Settings".

#### Adding a session

Add a session. After adding mobile communication settings, you will still be taken to this screen.

  On the "Edit Mobile Communication Settings" screen, click the "Add New" button.

![](https://manual.amnimo.com/wp-content/uploads/2024/07/G0706-05-1024x568.png)

  Set the following items (1) to (9).

❶ Enter a session name and slide the toggle to "Enable".

If toggling is enabled, a line connection is made when setting up additional sessions.
If disabled, no line connection will be made unless the toggle is enabled from the edit screen.

❷ Select SIM slot number and priority.

Priority 0 is the highest priority and 9 is the lowest priority.

![](https://manual.amnimo.com/wp-content/uploads/2024/07/G0706-06-1-1024x677.png)

❸ Enter the APN name.
❹ Select the authentication method.
❺ Enter user name and password.

![](https://manual.amnimo.com/wp-content/uploads/2024/07/G0706-07-1024x739.png)

❻ Select the connection wait time and call wait time (default values are 55 and 30 seconds, respectively).

Connection latency refers to the time it takes for communication with the base station to be established.
Call waiting time refers to the waiting time before being authenticated.

![](https://manual.amnimo.com/wp-content/uploads/2024/07/G0706-08-1024x447.png)

❼ Select the no communication detection time and maximum connection time (default values are both "disabled").

The packets to be monitored for no communication are those sent and received through the communication module. However, the following are not monitored:

 PING **request packets ( ICMP-echo-request )** PING **response packets ( ICMP-echo-reply )
DHCP protocol for obtaining IP address and DNS server information from the communication module**

If the connection state continues for the time set in the maximum connection time If the connection continues for the time set in the maximum connection time, the line is disconnected.

![](https://manual.amnimo.com/wp-content/uploads/2024/07/G0706-09-1024x320.png)

❽ Select the reconnect wait time and the number of connection retries (default values are 30 seconds and disabled, respectively).

**Reconnection Waiting Time**
This is the time to maintain the connection status without disconnecting the line when communication with the base station is temporarily unavailable.
By maintaining the connection for a set period of time, this function reduces the overhead of connection processing when reconnecting after a disconnection, thereby improving communication stability.
 Number **of connection retries**
Refers to the number of times the connection process is re-executed if the line connection process is not completed.

![](https://manual.amnimo.com/wp-content/uploads/2024/07/G0706-10-1024x332.png)

❾ Select enable/disable, threshold, and duration of line disconnection (default values are -113 dBm and 30 seconds, respectively).

This function disconnects the line when the RSSI value falls below the threshold value and continues for a specified period of time or longer. If the check box is not checked, the function is disabled.

![](https://manual.amnimo.com/wp-content/uploads/2024/07/G0706-11-1024x457.png)

  Click the [ Settings ] button.

![](https://manual.amnimo.com/wp-content/uploads/2024/07/G0706-12-1024x332.png)

#### Edit Session

Edit the registered session.

  On the "Edit Mobile Communication Settings" screen, click [...] to the right of the session you wish to edit and select [ Edit ] from the operation menu that appears.

![](https://manual.amnimo.com/wp-content/uploads/2024/07/G0706-13-1024x569.png)

The "Edit Session" screen appears.

  Edit the session settings and click the Settings button.

![](https://manual.amnimo.com/wp-content/uploads/2024/07/G0706-14-980x1024.png)

Session settings are updated and a list is displayed.

#### Deleting a session

Delete a registered session.

  On the "Edit Mobile Communication Settings" screen, click [...] to the right of the session you wish to delete and select [ Delete ] from the operation menu that appears.

![](https://manual.amnimo.com/wp-content/uploads/2024/07/G0706-15-1024x569.png)

The "Confirmation" screen appears.

  Click the "Delete" button.

![](https://manual.amnimo.com/wp-content/uploads/2024/07/G0706-16-1024x532.png)

Session settings are deleted.

On the "Edit Mobile Communication Settings" screen, you can also delete a session by clicking the checkbox to the left of the session you wish to delete, placing a checkmark in the box, and clicking the [ Delete ] button.
This is useful for deleting multiple sessions at once. You can also select only one session to delete.

![](https://manual.amnimo.com/wp-content/uploads/2024/07/G0706-17-1024x569.png)

### Edit mobile communication settings

Edit the registered mobile communication settings.

  On the "Mobile Communication Settings" screen, click [...] to the right of the mobile communication setting you wish to edit and select [ Edit ] from the operation menu that appears.

![](https://manual.amnimo.com/wp-content/uploads/2024/07/G0706-18-1024x412.png)

The "Edit Mobile Communication Settings" screen appears.

  Edit the mobile communication settings and click the Settings button.

![](https://manual.amnimo.com/wp-content/uploads/2024/07/G0706-19-1024x569.png)

Information on mobile communication settings will be updated and a list will be displayed.

### Delete mobile communication settings

To delete registered mobile communication settings, you can either delete them individually from the operation menu of mobile communication settings, or you can delete them after selecting all mobile communication settings you wish to delete.

#### Delete individual mobile communication settings

This method is to select Delete from the operation menu of the mobile communication settings.

  On the "Mobile Communication Settings" screen, click [...] to the right of the mobile communication setting you wish to delete and select [ Delete ] from the operation menu that appears.

![](https://manual.amnimo.com/wp-content/uploads/2024/07/G0706-20-1024x412.png)

The "Confirmation" screen appears.

  Click the [ Delete ] button.

![](https://manual.amnimo.com/wp-content/uploads/2024/07/G0706-21-1024x524.png)

Mobile communication settings are deleted.

#### Selecting and deleting multiple mobile communication settings

This method is used to check the mobile communication settings you wish to delete before deleting them. This is useful when deleting multiple mobile communication settings at once. You can also select one mobile communication setting to delete.

  On the "Mobile Communication Settings" screen, click the checkbox to the left of the mobile communication setting you wish to delete, place a checkmark in the checkbox, and click the [ Delete ] button.

![](https://manual.amnimo.com/wp-content/uploads/2024/07/G0706-22-1024x412.png)

The "Confirmation" screen appears.

  ［Click the Delete button.

![](https://manual.amnimo.com/wp-content/uploads/2024/07/G0706-21-1024x524.png)

The selected mobile communication settings will be deleted.