---
title: Configure proxy server settings
description: "This section describes the proxy server settings. **NOTE** In group settings, it is also possible to grant permissions restricted to \"standby ports\" only.     From the side menu, click Advanced Settings & Controls - Proxy Server Settings. The \"Proxy Server…"
url: "https://manual.amnimo.com/en/docs/advanced-settings/configure-proxy-server-settings/"
updated: "2024-08-13"
category: GUI / Advanced Settings
---

# Configure proxy server settings

This section describes the proxy server settings.

 **NOTE**

In group settings, it is also possible to grant permissions restricted to "standby ports" only.

   

  From the side menu, click Advanced Settings & Controls - Proxy Server Settings.

The "Proxy Server Settings" screen appears.

![](https://manual.amnimo.com/wp-content/uploads/2024/07/G0717-01-1024x485.png)

  Configure proxy server settings.

❶ Slide the toggle to enable the proxy server.
❷ Enter the listening port number. The default value is 8080.
❸ If a connection permission address is required, check the box and enter the source address.
❹ Set the destination port number.
❺ Set the SSL/TLS connection destination port number.

![](https://manual.amnimo.com/wp-content/uploads/2024/07/G0717-02-1024x537.png)

❻ Select deny or allow access control.
❼ Set the destination port number and SSL/TLS connection port number.
❽ White list/black list registration for specific FQDNs and URLs.
❾ Configure user authentication and access log settings.

![](https://manual.amnimo.com/wp-content/uploads/2024/07/G0717-03-1024x441.png)

  When settings are complete, click on "Configure".