---
title: Configure SSH settings
description: "Configure settings to connect to this product via SSH. SSH must be enabled when connecting to this product using a terminal emulator or similar device. Click \\[Advanced Settings/Controls\\] - \\[SSH Settings\\] on the side menu. ![](https://manual.amnimo.com/wp-content/uploads/2024/07/G0719-01-1024x376.png) The \"SSH Settings\" screen…"
url: "https://manual.amnimo.com/en/docs/advanced-settings/configure-ssh-settings/"
updated: "2024-08-13"
category: GUI / Advanced Settings
---

# Configure SSH settings

Configure settings to connect to this product via SSH.
SSH must be enabled when connecting to this product using a terminal emulator or similar device.

  Click \[Advanced Settings/Controls\] - \[SSH Settings\] on the side menu.

![](https://manual.amnimo.com/wp-content/uploads/2024/07/G0719-01-1024x376.png)

The "SSH Settings" screen appears.

  Slide the toggle to set SSH as enabled.

![](https://manual.amnimo.com/wp-content/uploads/2024/07/G0719-02-1024x331.png)

  Set the following (1) to (2).

❶ Change the port number if necessary.

![](https://manual.amnimo.com/wp-content/uploads/2024/07/G0719-03-1024x197.png)

 **NOTE**

- The port number can be set in the range of 1 to 65535.
- SSH uses port 22 as standard.
  Note that if the port number is changed, the client must specify that port number to connect.

❷ By checking the "Enable keep-alive" checkbox, keepalive packets can be sent periodically to prevent SSH connections from timing out.

![](https://manual.amnimo.com/wp-content/uploads/2024/07/G0719-04-1024x197.png)

  Set the encryption method.

❶ Select "Recommended setting" or "Individual selection" as the encryption method to be used.

- If you selected "Recommended Settings," go to Step 5.

![](https://manual.amnimo.com/wp-content/uploads/2024/07/G0719-05-1-1024x69.png)

❷ If "Individual Selection" is selected, check the checkbox for the encryption method to be used.

![](https://manual.amnimo.com/wp-content/uploads/2024/07/G0719-06-1024x390.png)

  Click the \[ Settings \] button.

SSH is configured.