---
title: Transmission of recorded data (AB12)
description: "Video recorded on an AMNIMO portable device can be sent to an integrated video management system. Transmitted recordings can be played back on the integrated video management system. **NOTE** For instructions on how to operate the integrated video management system,…"
url: "https://manual.amnimo.com/en/docs/basic-operation-amnimo-portable-device-np/transmission-of-recorded-data-ab12/"
updated: "2026-01-06"
category: Basic operation / Basic Operation (Amnimo Portable Device NP)
---

# Transmission of recorded data (AB12)

Video recorded on an AMNIMO portable device can be sent to an integrated video management system.
Transmitted recordings can be played back on the integrated video management system.

 **NOTE**

For instructions on how to operate the integrated video management system, see
⇒ The **[Integrated Video Management System Manual](https://manual.amnimo.com/en/docs/enhanced-video-management-system/)**

## Transmitting recorded data

Recorded data transmission uploads the video data recorded on the internal SD card to the integrated video management system.

  Tap ▲ on the right end of the user selection screen.

![](https://manual.amnimo.com/wp-content/uploads/2025/12/ABSG0805-09-01.webp)

［Tapping [Recording data can be sent] will also result in the same operation (display of [Recording data can be sent]).

 **NOTE**

［The "Transmit Recording Data" button appears only when the camera is connected to a wireless LAN.

![](https://manual.amnimo.com/wp-content/uploads/2025/12/ABSG0805-09.webp)

  ［Tap [Send Recording Data].

![](https://manual.amnimo.com/wp-content/uploads/2025/12/ABSG0805-10.webp)

The screen transitions as follows

![](https://manual.amnimo.com/wp-content/uploads/2025/12/ABSG0805-10-01.webp)

  If the transmission is successful, the following screen will appear, and tap [OK].

![](https://manual.amnimo.com/wp-content/uploads/2025/12/ABSG0805-11.webp)

  Returns to the user selection screen.

![](https://manual.amnimo.com/wp-content/uploads/2025/12/ABSG0805-12.webp)

## Stop sending recorded data

To stop transmission while recording data is being sent, follow the steps below.

 **NOTE**

If the transmission of recorded data is stopped, the unsent recorded data will be sent when the recording data is sent again.

  ［Tap Cancel.

![](https://manual.amnimo.com/wp-content/uploads/2025/12/ABSG0805-13.webp)

  Transmission of recorded data stops and returns to the user selection screen.

![](https://manual.amnimo.com/wp-content/uploads/2025/12/ABSG0805-14.webp)