---
title: screen configuration
description: "## Dashboard After signing in, the dashboard screen will first appear. This section describes the names and functions of common icons. ![](https://manual.amnimo.com/wp-content/uploads/2024/06/image-1-1024x586.png) Next, functions that are mainly used for browsing and operation are explained in turn. ### Application Available applications…"
url: "https://manual.amnimo.com/en/docs/basic-operation-en/screen-configuration/"
updated: "2024-07-04"
category: SMP / Basic operation
---

# screen configuration

## Dashboard

After signing in, the dashboard screen will first appear. This section describes the names and functions of common icons.

![](https://manual.amnimo.com/wp-content/uploads/2024/06/image-1-1024x586.png)

Next, functions that are mainly used for browsing and operation are explained in turn.

### Application

Available applications are indicated according to contract status.

![](https://manual.amnimo.com/wp-content/uploads/2024/06/image-2-1024x212.png)

Clicking in the respective frame will take you to the top screen of the application.
For information on how to operate the system, please access the application-specific manual from the Help icon on the menu bar.

### device

Device information is displayed in the lower left corner of the application information.

![](https://manual.amnimo.com/wp-content/uploads/2024/06/image-3-1024x553.png)

Here, you can view information on all devices managed by your tenant (including devices managed by subordinate tenants).
The meanings of the numbers shown are as follows

- Total ：Total number of devices registered in the tenant
- Normal : Number of enabled devices that are operating normally
- In preparation: Number of devices not enabled
- Error : Number of activated devices that are malfunctioning

### camera

Camera information is displayed in the lower right corner of the application information.

![](https://manual.amnimo.com/wp-content/uploads/2024/06/image-4-1024x542.png)

Here, you can view information on all cameras managed by your tenant that are in use (including cameras managed by subordinate tenants).
The meanings of the numbers shown are as follows

- Total ：Total number of cameras in use owned by tenants
- Online: Number of cameras that are online among the cameras in use owned by the tenant.
- Offline: Number of cameras that are offline among the cameras in use owned by the tenant.

Clicking on the \[ Details \] button in the lower right corner will display the following items, depending on the application under contract.

#### If you are using an integrated video management system

Shows the amount of live streaming data used during the month for each tenant.

![](https://manual.amnimo.com/wp-content/uploads/2024/06/S0201-01-1-1024x567.jpg)

#### If you are using Cloud Video Recorder

The camera associated with each tenant and the period of time the data is retained in the cloud according to the contract are displayed.

![](https://manual.amnimo.com/wp-content/uploads/2024/06/S0201-02-1-1024x404.jpg)

The tabs at the top allow you to switch to a screen that displays the total recording time of the video clips taken and the number of snapshots.

![](https://manual.amnimo.com/wp-content/uploads/2024/06/S0201-03-1024x419.jpg)

## tenant (usu. office block, shopping center, etc.)

If you are a tenant administrator and log in to the Service Management Portal, you will see the tenant icon in the sidebar.

![](https://manual.amnimo.com/wp-content/uploads/2024/06/S0201-04-1024x373.jpg)

As shown in the figure above, if there are sub-tenants, the tenant names are arranged in a tree-like structure.
In common with both hierarchies, clicking on the icon to the right of the tenant name will do the following

![](http://manual.amnimo.com/wp-content/uploads/2024/05/i68.jpg) [Create a new sub-tenant](https://manual.amnimo.com/docs/service-management-portal/basic-operation/%e3%83%86%e3%83%8a%e3%83%b3%e3%83%88%e7%ae%a1%e7%90%86/#%E3%82%B5%E3%83%96%E3%83%86%E3%83%8A%E3%83%B3%E3%83%88%E3%81%AE%E6%96%B0%E8%A6%8F%E4%BD%9C%E6%88%90) You can create a new tenant at a level below the tenant you are managing.

![](http://manual.amnimo.com/wp-content/uploads/2024/05/i69.jpg) [Edit or Delete Tenants](https://manual.amnimo.com/docs/service-management-portal/basic-operation/%e3%83%86%e3%83%8a%e3%83%b3%e3%83%88%e7%ae%a1%e7%90%86/#%E3%82%B5%E3%83%96%E3%83%86%E3%83%8A%E3%83%B3%E3%83%88%E3%81%AE%E5%89%8A%E9%99%A4) You can edit or delete tenants you manage.