---
title: Tenant switching
description: "This section describes in turn how to switch the tenants to be operated. ![](https://manual.amnimo.com/wp-content/uploads/2024/05/image-10-1024x469.png) ## Tenant switching Tenant switching is performed as follows Click the My Account icon in the upper right corner of the screen (①) and click [Switch…"
url: "https://manual.amnimo.com/en/docs/basic-operation-en/tenant-switching/"
updated: "2024-06-19"
category: SMP / Basic operation
---

# Tenant switching

This section describes in turn how to switch the tenants to be operated.

![](https://manual.amnimo.com/wp-content/uploads/2024/05/image-10-1024x469.png)

## Tenant switching

Tenant switching is performed as follows

  Click the My Account icon in the upper right corner of the screen (①) and click [Switch Tenants] (②).

![](https://manual.amnimo.com/wp-content/uploads/2024/06/S0203-01-1024x493.jpg)

  A list of tenants will appear, click on the tenant you wish to switch to.

![](https://manual.amnimo.com/wp-content/uploads/2024/06/S0203-02-1024x486.jpg)

  Tenant switchover is complete.

![](https://manual.amnimo.com/wp-content/uploads/2024/06/S0203-03-1024x490.jpg)

## Default Tenant Settings

To set any tenant to appear as the default, follow these steps

  Click the My Account icon in the upper right corner of the screen (①) and click [Switch Tenants] (②).

![](http://manual.amnimo.com/wp-content/uploads/2024/05/S0203-01-1024x493.jpg)

  When the tenant list appears, click Set as Default next to the tenant you want to display as the default.

![](https://manual.amnimo.com/wp-content/uploads/2024/06/S0203-04-1024x488.jpg)

  The tenant has switched and the default tenant has been configured.

![](https://manual.amnimo.com/wp-content/uploads/2024/06/S0203-05-1024x489.jpg)