Compact routers can be rebooted by command operation.
There are two types of reboots: software reboot, which stops the system, and hardware reboot, which does not stop the system.
To reboot the compact router, you must enter administrator mode.
Software reboot after system shutdown.
An example of command execution is shown below.
amnimo$ enable ← 管理者モードに移行
password: ← パスワード入力
amnimo# reboot type soft
Are you sure you want to restart? (y/n):y ←「y」キーに続けてEnterを入力
Without shutting down the system, power off the hardware and reboot.
An example of command execution is shown below.
amnimo$ enable ← 管理者モードに移行
password: ← パスワード入力
amnimo# reboot type hard
Are you sure you want to restart? (y/n):y ←「y」キーに続けてEnterを入力