---
title: 1. activate the device
description: "**メモ** If you use amnimo VMS as your VMS, please enable amnimo VMS in the CLI (see the procedure for enabling amnimo VMS). **[Click here](https://support.amnimo.com/hc/ja/articles/28311285613081-amnimo-VMS-%E3%81%AE%E5%88%9D%E6%9C%9F%E8%A8%AD%E5%AE%9A%E3%82%92%E8%A1%8C%E3%81%86)** ) and then proceed with the following steps. This section describes the procedure for activating…"
url: "https://manual.amnimo.com/en/docs/initial-setting-evms-en/1-activate-the-device/"
updated: "2024-11-26"
category: eVMS / Initial setting
---

# 1. activate the device

**メモ**

If you use amnimo VMS as your VMS, please enable amnimo VMS in the CLI (see the procedure for enabling amnimo VMS). **[Click here](https://support.amnimo.com/hc/ja/articles/28311285613081-amnimo-VMS-%E3%81%AE%E5%88%9D%E6%9C%9F%E8%A8%AD%E5%AE%9A%E3%82%92%E8%A1%8C%E3%81%86)** ) and then proceed with the following steps.

This section describes the procedure for activating the device.

  Click ▼, select \[ Devices \] (①), and then click \[ Show devices in preparation \] (②).

![](https://manual.amnimo.com/wp-content/uploads/2024/06/E0201-01-902x1024.png)

  Click Enable for the device you wish to activate.  準備中のデバイス一覧から有効化

1. In the list of devices being prepared, click "Enable" for the device you wish to activate.
   ![](https://manual.amnimo.com/wp-content/uploads/2024/06/E0201-02.png)

    設定画面から有効化

1. In the list of devices being prepared, click ![](https://manual.amnimo.com/wp-content/uploads/2024/07/e01.png) for the device you wish to activate.
   ![](https://manual.amnimo.com/wp-content/uploads/2024/06/E0201-03.png)
2. When the settings window opens, click Enable.
   ![](https://manual.amnimo.com/wp-content/uploads/2024/06/E0201-04.png)

    Click Yes when the confirmation window opens. (This process may take several minutes.)

![](https://manual.amnimo.com/wp-content/uploads/2024/06/E0201-05.png)

  The display changes to \[ Activating \].

![](https://manual.amnimo.com/wp-content/uploads/2024/06/E0201-06-1024x631.png)

  When activation is complete, the Deactivate button becomes active.

![](https://manual.amnimo.com/wp-content/uploads/2024/06/E0201-07-1024x631.png)

  Devices that have been activated are displayed in the sidebar of the camera detail screen.

![](https://manual.amnimo.com/wp-content/uploads/2024/06/E0201-08-918x1024.png)