---
title: Set up authentication information for VMS
description: "This section describes the procedure for configuring VMS credentials from the gateway settings. **注意** VMS authentication is different from camera authentication. Authentication requires Nx Witness administrator account information. **メモ** If you use amnimo VMS, you do not need to register…"
url: "https://manual.amnimo.com/en/docs/initial-setting-evms-en/set-up-authentication-information-for-vms/"
updated: "2024-07-12"
category: eVMS / Initial setting
---

# Set up authentication information for VMS

This section describes the procedure for configuring VMS credentials from the gateway settings.

 **注意**

VMS authentication is different from camera authentication. Authentication requires Nx Witness administrator account information.

   **メモ**

If you use amnimo VMS, you do not need to register VMS authentication information. Please go to "3. Detecting cameras".

  デバイスの横にある ![](https://amnimo.com/manual/edge_gw/evms/ja/assets/images/image179.png) アイコンをクリックし、\[ ゲートウェイ設定 \] をクリックします。

![](https://manual.amnimo.com/wp-content/uploads/2024/06/E0202-01.png)

  \[Under Other, click VMS Authentication Information.

![](https://manual.amnimo.com/wp-content/uploads/2024/06/E0202-02-1024x644.png)

  When the authentication screen appears, enter the user name and password and click on "Setup".

![](https://manual.amnimo.com/wp-content/uploads/2024/06/E0202-03.png)

1.