---
title: Names and roles of each part of the IoT router
description: "This section describes the basic configuration of the IoT router itself. ### IoT Router (indoor version) This section describes the basic configuration of the IoT Router (indoor version) main unit. #### facade The configuration of the front panel (with the…"
url: "https://manual.amnimo.com/en/docs/iot-router-product-overview/names-and-roles-of-each-part-of-the-iot-router/"
updated: "2024-09-10"
category: IoT Router Product Overview
---

# Names and roles of each part of the IoT router

This section describes the basic configuration of the IoT router itself.

### IoT Router (indoor version)

This section describes the basic configuration of the IoT Router (indoor version) main unit.

#### facade

The configuration of the front panel (with the lid of the SD card section open) is shown below.

![](https://manual.amnimo.com/wp-content/uploads/2024/09/ARUM0401-01-1024x295.png)

| No. | name | Description. |
| --- | --- | --- |
| ❶ | SIM card slot 0, SIM card slot 1 | Two SIM cards can be inserted in the SIM card slot. The priority level changes depending on the setting. By default, SIM 0 is used. The AR10-000JP model does not have a SIM card slot. |
| ❷ | LED Indicator | From left to right, they are arranged as PWR, ANT, MOB, and ST. The description of each LED is as follows PWR: Shows the power status. ANT: Displays the antenna status. MOB: Shows the line connection status of the communication module. ST: Shows specific status in combination with other indicators. For AR10-000JP models, the notation will change: ANT will be OPT2, MOB will be OPT1, and the status will be uncontrolled. |
| ❸ | DIP switches for configuration | Sets the startup mode of the IoT router. |
| ❹ | PUSH switch | Used to shut down the IoT router or restore it to factory settings. |
| (in Japanese) ❺ | CONSOLE Port | Used to configure the IoT router; connects via USB Type-C connector. |

#### back

The rear configuration is shown below.

![](https://manual.amnimo.com/wp-content/uploads/2024/09/ARUM0401-02-1024x257.png)

| No. | name | Description. |
| --- | --- | --- |
| ❶ | subantenna | Connect antenna for 3G/4G line, SMA-J type. |
| ❷ | PWR | Connect AC adapter (sold separately) or DC power cable. Center positive, Φ2.1 DC jack connector. |
| ❸ | FG | Connect frame ground. Connect M3 crimp terminals. |
| ❹ | cable clamp | Prevents power cable disconnection. |
| (in Japanese) ❺ | ETH0 and ETH1 ports | Standard Ethernet port with Gigabit Ethernet support. |
| (in Japanese) ❻ | main antenna | Connect antenna for 3G/4G line, SMA-J type. |

 **ALERT**

When connecting a DC power cable to the PWR, use it within the rated voltage.

 **NOTE**

The AR10-000JP model does not have main or sub-antenna terminals.

#### three-sided view

Three views of the IoT router are shown below.

![](https://manual.amnimo.com/wp-content/uploads/2024/09/ARUM0401-03-1024x516.png)

### IoT Router (outdoor version)

This section describes the basic configuration of the IoT Router (outdoor version) itself.

#### Front (lid open)

The configuration of the front view when the lid is open is shown below.

![](https://manual.amnimo.com/wp-content/uploads/2024/09/ARUM0401-04-782x1024.png)

| No. | name | Description. |
| --- | --- | --- |
| ❶ | LED Indicator | From left to right, they are arranged as PWR, ANT, MOB, and ST. The description of each LED is as follows PWR: Displays the power supply status. ANT: Displays the antenna status. MOB: Shows the line connection status of the communication module. ST: In combination with other indicators, a specific state is indicated. |
| ❷ | power switch | Turns power on and off. |
| ❸ | SIM card slot 0, SIM card slot 1 | Two SIM cards can be inserted in the SIM card slot. The priority level changes depending on the setting. By default, SIM 0 is used. |
| ❹ | AC power input terminal | From left to right: FG, L (ungrounded side), N (grounded side). Screw shape is M4. |

#### Diagonal front 1 (lid open)

The diagonal frontal configuration is shown below.

![](https://manual.amnimo.com/wp-content/uploads/2024/09/ARUM0401-05-1024x1019.png)

| No. | name | Description. |
| --- | --- | --- |
| ❶ | ETH0 port | Standard Ethernet port with Gigabit Ethernet support. |
| ❷ | ETH1 port | Standard Ethernet port with Gigabit Ethernet support. |

#### Diagonal front 2 (lid open)

The diagonal frontal configuration is shown below.

![](https://manual.amnimo.com/wp-content/uploads/2024/09/ARUM0401-06-1024x665.png)

| No. | name | Description. |
| --- | --- | --- |
| ❶ | DIP switches for configuration | Sets the startup mode of the IoT router. |
| ❷ | PUSH switch | Used to shut down the IoT router or restore it to factory settings. |
| ❸ | CONSOLE Port | Used to configure the IoT router; connects via USB Type-C connector. |

#### three-sided view

A three-view diagram is shown below.

![](https://manual.amnimo.com/wp-content/uploads/2024/09/ARUM0401-07-1024x751.png)