---
title: Restart/Stop
description: "This section describes the operation of the \"Restart/Stop\" screen. Click on \\[Administration\\] > \\[Reboot/Stop\\] from the side menu to open the \"Reboot/Stop\" screen. ![](https://manual.amnimo.com/wp-content/uploads/2025/07/GU1003-01-1024x346.png) In addition to shutdown, the device has two other reboot menus: software reboot, which stops the…"
url: "https://manual.amnimo.com/en/docs/management-gui-en/restart-stop/"
updated: "2025-10-03"
category: GUI (FW v3.2.0) / Management (GUI)
---

# Restart/Stop

This section describes the operation of the "Restart/Stop" screen.

Click on \[Administration\] > \[Reboot/Stop\] from the side menu to open the "Reboot/Stop" screen.

![](https://manual.amnimo.com/wp-content/uploads/2025/07/GU1003-01-1024x346.png)

In addition to shutdown, the device has two other reboot menus: software reboot, which stops the system, and hardware reboot, which does not stop the system.

| **shutdown** | Deactivates the power supply for the hardware. |
| --- | --- |
| **software reboot** | Restart the system after shutting it down. |
| **hardware reboot** | Without shutting down the system, power off and restart the hardware. |

## Reboot the device

  Check \[Software reboot\] or \[Hardware reboot\] as the reboot method (①) and click \[Reboot\] (②).

![](https://manual.amnimo.com/wp-content/uploads/2025/07/GU1003-02-1024x215.png)

  ［Click "Run.

![](https://manual.amnimo.com/wp-content/uploads/2025/07/GU1003-03.png)

The device will start rebooting and the following dialog will appear.
Rebooting takes a few minutes.

![](https://manual.amnimo.com/wp-content/uploads/2025/09/GU1003-03-01.png)

After the restart is complete, the "Sign In" screen will appear.

## Shut down the device

  Check \[Shutdown\] as the stop method (①) and click \[Stop\] (②).

![](https://manual.amnimo.com/wp-content/uploads/2025/07/GU1003-04-1024x223.png)

  ［Click "Run.

![](https://manual.amnimo.com/wp-content/uploads/2025/07/GU1003-05.png)

Device shutdown is initiated.
Confirm the following dialog box and click \[Close\].

![](https://manual.amnimo.com/wp-content/uploads/2025/09/GU1003-05-01.webp)