--- title: Network configuration (AB12) description: "To configure the network settings, a network configuration QR code must be pre-generated and read by the amnemo portable device. ## Generate QR code for network configuration Depending on your network environment, please configure the following settings. - **Connecting via…" url: "https://manual.amnimo.com/en/docs/network-configuration-amnimo-portable-device-np/network-configuration-ab12/" updated: "2026-01-19" category: Network Settings and Functions / Network configuration (Amnimo Portable Device NP) --- # Network configuration (AB12) To configure the network settings, a network configuration QR code must be pre-generated and read by the amnemo portable device. ## Generate QR code for network configuration Depending on your network environment, please configure the following settings. - **Connecting via wireless LAN** → [To generate a QR code for wireless LAN settings](/?doc_category=network-setting-ab12#%E7%84%A1%E7%B7%9A-lan-%E8%A8%AD%E5%AE%9A%E7%94%A8-qr-%E3%82%B3%E3%83%BC%E3%83%89%E3%82%92%E7%94%9F%E6%88%90%E3%81%99%E3%82%8B%E5%A0%B4%E5%90%88) - ****Connecting via mobile network** (using SIM card)** → [To generate a QR code for APN setup](/?doc_category=network-setting-ab12#apn-%E8%A8%AD%E5%AE%9A%E7%94%A8-qr-%E3%82%B3%E3%83%BC%E3%83%89%E3%82%92%E7%94%9F%E6%88%90%E3%81%99%E3%82%8B%E5%A0%B4%E5%90%88) **NOTE** If both connection methods are to be used, **generate both QR codes and set them up respectively**. (e.g., if you normally use a wireless LAN connection and a mobile network connection when outdoors) ### To generate a QR code for wireless LAN setup Generates a QR code with information on the wireless LAN to which the AMNIMO Portable Device NP is connected. On a PC, access the following URL **ネットワーク設定用 QR コード生成 URL** [https://apps.amnimo.com/video/amp/qrcode/index.html](https://apps.amnimo.com/video/amp/qrcode/index.html) Set the type to "Wireless LAN" as a common setting. ![](https://manual.amnimo.com/wp-content/uploads/2025/12/ABSG0901-09-01.webp) Set the following items (1) to (4) as the wireless LAN settings, and click [Generate QR Code]. Enter the SSID. Enter the priority level. Enter the password. Select the encryption type. ![](https://manual.amnimo.com/wp-content/uploads/2025/12/ABSG0901-10.webp) A QR code for wireless LAN setup is generated. ### To generate a QR code for APN setup Generate the APN information used by the AMNIMO Portable Device NP as a QR code. On a PC, access the following URL **ネットワーク設定用 QR コード生成 URL** [https://apps.amnimo.com/video/amp/qrcode/index.html](https://apps.amnimo.com/video/amp/qrcode/index.html) Set the type to "LTE" as a common setting. ![](https://manual.amnimo.com/wp-content/uploads/2025/12/ABSG0901-09-02.webp) Set the following items (1) to (4) for the APN profile and click [Generate QR Code]. Enter an arbitrary name for identification. Enter the APN. Enter a user name. Enter the password. (5) Check [ON] for automatic connection. (6) Enter the MCC (Mobile Country Code). (7) Enter the MNC (Mobile Network Code). **NOTE** Please refer to the following for information required for APN profiles. ⇒See " [List of SIMs Tested".](https://manual.amnimo.com/?post_type=docs&p=25758&preview=true) ![](https://manual.amnimo.com/wp-content/uploads/2025/12/ABSG0901-11.webp) A QR code for LTE setup is generated. ## Configure network settings Read the QR code for network settings on the Amnimo portable device NP (AB12) and configure the network settings. **Tap ▲ on the user selection screen**. ![](https://manual.amnimo.com/wp-content/uploads/2025/12/ABSG0901-19-1.webp) ［Tap Settings. ![](https://manual.amnimo.com/wp-content/uploads/2025/12/ABSG0901-20-1.webp) ［Tap Network Settings. ![](https://manual.amnimo.com/wp-content/uploads/2025/12/ABSG0901-21-1.webp) ［Tap Settings. ![](https://manual.amnimo.com/wp-content/uploads/2025/12/ABSG0901-22-1.webp) ［Tap [Get settings with QR code]. ![](https://manual.amnimo.com/wp-content/uploads/2025/12/ABSG0901-23-1.webp) Use the camera on the device to read the QR code. **[QR code generation for network settings](https://manual.amnimo.com/?post_type=docs&p=22322#%E3%83%8D%E3%83%83%E3%83%88%E3%83%AF%E3%83%BC%E3%82%AF%E8%A8%AD%E5%AE%9A%E7%94%A8-qr-%E3%82%B3%E3%83%BC%E3%83%89%E3%82%92%E7%94%9F%E6%88%90%E3%81%99%E3%82%8B)** Read the QR code generated in section 3.2. **NOTE** If the camera shutter is closed, raise the slide switch next to the unit to open the shutter. ![](https://manual.amnimo.com/wp-content/uploads/2025/12/ABSG0901-24-1.webp) ［Tap Add Content to Settings. ![](https://manual.amnimo.com/wp-content/uploads/2025/12/ABSG0901-25.webp) ［Tap OK. ![](https://manual.amnimo.com/wp-content/uploads/2025/12/ABSG0901-26.webp) Network configuration is complete. ## Check and delete network settings. ****Tap ▲ on the user selection screen**.** ![](https://manual.amnimo.com/wp-content/uploads/2025/12/ABSG0901-19-1.webp) ［Tap Settings. ![](https://manual.amnimo.com/wp-content/uploads/2025/12/ABSG0901-20-1.webp) ［Tap Network Settings. ![](https://manual.amnimo.com/wp-content/uploads/2025/12/ABSG0901-21-1.webp) Tap [APN List] or [Wireless LAN List], depending on the list you wish to check. | APN List | Wireless LAN List | | --- | --- | | ![](https://manual.amnimo.com/wp-content/uploads/2025/12/ABSG0901-30-01-1.webp) | ![](https://manual.amnimo.com/wp-content/uploads/2025/12/ABSG0901-30-02.webp) | You can check the "APN List" or "Wireless LAN List". | APN List | Wireless LAN List | | --- | --- | | ![](https://manual.amnimo.com/wp-content/uploads/2025/12/ABSG0901-31-01.webp) | ![](https://manual.amnimo.com/wp-content/uploads/2025/12/ABSG0901-31-02.webp) | To delete a network setting, tap [ ⋮ ] in the row for the APN setting or wireless LAN setting you wish to delete, then tap [Delete] when it appears. ![](https://manual.amnimo.com/wp-content/uploads/2025/12/ABSG0901-32.webp) ［Tap Yes. ![](https://manual.amnimo.com/wp-content/uploads/2025/12/ABSG0901-33.webp) Tap [OK] when the network settings are deleted. ![](https://manual.amnimo.com/wp-content/uploads/2025/12/ABSG0901-34.webp)