Choose “Save as PDF” as the destination to download this doc.

Back to the doc
amnimo Manual Library

Network configuration (AB11)

Network configuration (Amnimo portable device)  ·  https://manual.amnimo.com/en/docs/network-configuration-amnimo-portable-device/network-configuration-2/

To configure the network settings, a QR code for network settings must be created in advance and scanned by the Amnimo portable.

Generate QR code for network configuration

Depending on your network environment, please configure the following settings.

NOTE

If both connection methods are to be used, generate both QR codes and set them up respectively.
(e.g., if you normally use a wireless LAN connection and a mobile network connection when outdoors)

To generate a QR code for wireless LAN setup

Generates a QR code with information on the wireless LAN to which the AMNIMO Portable Device NP is connected.

On a PC, access the following URL
ネットワーク設定用 QR コード生成 URL

https://apps.amnimo.com/video/amp/qrcode/index.html

Set the type to "Wireless LAN" as a common setting.
Set the following items (1) to (4) as the wireless LAN settings, and click [Generate QR Code].

Enter the SSID.
Enter the priority level.
Enter the password.
Select the encryption type.

A QR code for wireless LAN setup is generated.

To generate a QR code for APN setup

Generate the APN information used by the AMNIMO Portable Device NP as a QR code.

On a PC, access the following URL
ネットワーク設定用 QR コード生成 URL

https://apps.amnimo.com/video/amp/qrcode/index.html

Set the type to "LTE" as a common setting.
Set the following items (1) to (4) for the APN profile and click [Generate QR Code].

Enter an arbitrary name for identification.
Enter the APN.
Enter a user name.
Enter the password.
(5) Check [ON] for automatic connection.
(6) Enter the MCC (Mobile Country Code).
(7) Enter the MNC (Mobile Network Code).

NOTE

Please refer to the following for information required for APN profiles.
⇒See " List of SIMs Tested".

A QR code for LTE setup is generated.

Configure network settings

Scan the QR code for network settings on the AMNIMO portable to configure network settings.

Click the gear icon on the home screen.
［Click Network Settings.
［Click Settings.
［Click on "Get settings with QR code".
Scan the QR code.

Generate QR code for network configuration Scan the QR code generated in

［Click Add Content to Configuration.
［Click ALLOW.
［Click OK.

Network configuration is complete.

Check and delete network settings.

Confirm or delete the APN list

Click the gear icon on the home screen.
［Click Network Settings.
［Click APN List.

You can check the APN list.

To delete an APN setting, click [⋮] in the row for the APN setting you wish to delete, then click [Delete] when it appears.
［Click Yes.

APN settings are deleted.

Check/delete the wireless LAN list

Click the gear icon on the home screen.
［Click Network Settings.
［Click on Wireless LAN List.

You can check the wireless LAN list.

To delete a wireless LAN setting, click ⋮ in the row for the wireless LAN setting you wish to delete, then click Delete when it appears.
［Click Yes.

The wireless LAN settings are deleted.