---
title: DHCP Relay
description: "This section describes the operation of the \"DHCP Relay\" screen. Here you can add, edit, or delete DHCP relay settings. **NOTE** Note that the DHCP server cannot be enabled when the DHCP relay setting is enabled. Click [Service Settings] >…"
url: "https://manual.amnimo.com/en/docs/service-configuration-gui/dhcp-relay/"
updated: "2025-10-03"
category: GUI (FW v3.2.0) / Service Configuration (GUI)
---

# DHCP Relay

This section describes the operation of the "DHCP Relay" screen.
Here you can add, edit, or delete DHCP relay settings.

 **NOTE**

Note that the DHCP server cannot be enabled when the DHCP relay setting is enabled.

Click [Service Settings] > [DHCP Relay] in the side menu to open the "DHCP Relay" window.

![](https://manual.amnimo.com/wp-content/uploads/2025/09/GU0902-01-1024x327.webp)

## Display a list of DHCP relay settings

Open the "DHCP Relay" window to view a list of DHCP relay settings.

![](https://manual.amnimo.com/wp-content/uploads/2025/09/GU0902-02-1024x354.webp)

## Adding DHCP Relay Settings

  ［Click Add New.

![](https://manual.amnimo.com/wp-content/uploads/2025/09/GU0902-03-1024x225.webp)

The "Add DHCP Relay Settings" screen appears.

  Set the following items (1) to (4) for the DHCP Relay setting information, and click Next.

Enter a group name.
(2) Click the toggle to select Enable / Disable.
Enter the IP address of the DHCP server. ［Up to four IP addresses can be specified by clicking "+Add".
Select the receiving interface. ［If "Yes" is selected, the interface must be selected. ［Up to 10 (1 for AC series) can be specified by clicking "+Add".

![](https://manual.amnimo.com/wp-content/uploads/2025/07/GU0902-04-1024x629.webp)

  Confirm the information entered and click "Setup".

![](https://manual.amnimo.com/wp-content/uploads/2025/09/GU0902-05-1024x431.webp)

## Edit DHCP Relay Settings

  Click [...] to the right of the DHCP Relay setting you wish to edit and select Edit from the menu that appears.

![](https://manual.amnimo.com/wp-content/uploads/2025/09/GU0902-06-1024x323.webp)

The "Edit DHCP Relay Settings" window appears.

  Configure the settings in the "Edit DHCP Relay Settings" window and click "Configure" to complete editing the DHCP relay settings.

![](https://manual.amnimo.com/wp-content/uploads/2025/09/GU0902-07-1024x424.webp)

## Delete DHCP relay settings

There are two ways to delete DHCP relay settings: individually or collectively.

### Delete individual DHCP relay settings

  Click [...] to the right of the DHCP Relay setting you wish to delete and select [Delete] from the menu that appears.

![](https://manual.amnimo.com/wp-content/uploads/2025/09/GU0902-08-1024x323.webp)

  ［Click Delete.

![](https://manual.amnimo.com/wp-content/uploads/2025/09/GU0902-09.webp)

The DHCP relay setting is deleted.

### Selecting and deleting multiple DHCP Relay settings

This method is used to check the DHCP relay settings to be deleted before deleting them. This is useful for deleting multiple DHCP Relay settings at once.
You can also select a single DHCP Relay setting to delete.

   Click the checkbox to the left of the DHCP Relay setting you wish to delete, place a checkmark in the checkbox, and click [Delete].

![](https://manual.amnimo.com/wp-content/uploads/2025/09/GU0902-10-1024x323.webp)

  ［Click Delete.

![](https://manual.amnimo.com/wp-content/uploads/2025/09/GU0902-11.webp)

The DHCP relay setting is deleted.