--- title: Simple configuration (FW v.3.1.1 or earlier) description: "The following settings can be made on the \"Simple Settings\" screen. - Mobile Communication Settings - Interface Settings - Package Repository Credentials - Enable/Disable DNS - filter (esp. camera) - Enable/Disable DMS (Device Management System) - Enable/Disable Nx Witness **NOTE**…" url: "https://manual.amnimo.com/en/docs/step-3-configure-the-edge-gateway-en/configure-simple-settings-2/" updated: "2025-12-03" category: "AX-SG / Step 3 Configure the AI Edge Gateway" --- # Simple configuration (FW v.3.1.1 or earlier) The following settings can be made on the "Simple Settings" screen. - Mobile Communication Settings - Interface Settings - Package Repository Credentials - Enable/Disable DNS - filter (esp. camera) - Enable/Disable DMS (Device Management System) - Enable/Disable Nx Witness **NOTE** - This page is common to AG, AR, and AX series. - If you use AR10-000JP (without communication module) model with IoT router, you do not need to set up mobile communication. Note that the DNS and filtering settings are automatically applied when the simple settings are made. The DNS and filtering settings that are automatically applied are as follows For detailed settings, please refer to the following. ⇒ GUI User's Manual ["Configuring DNS Settings"](/?doc_category=dns設定をする) GUI User's Manual ["Configuring Filter Settings"](/?doc_category=フィルター設定をする) | Feature | (data) item | set value (e.g. of a function, parameter, etc.) | | --- | --- | --- | | Domain Name System | enable/disable setting | validity | | Filtering input settings | Input default policy related established invalid input interface | Discard Permit Permit Discard Permit | | Filtering forwarding settings | Transfer Default Policy | permit | | Filtering output settings | Output Default Policy | permit | **NOTE** If your Edge Gateway version is V1.1.2 or earlier, the default DNS server settings are invalid. Also, there is no GUI function. If you update from V1.1.2 to V1.2.1 or later, DNS will be disabled if it has not been configured. Also, GUI will be disabled. Please refer to the following manual for information on how to check the version. ⇒ GUI User's Manual [, "Checking Device Information".](/?doc_category=機器情報を確認する)   ## Simple Setup Procedure **WARNING** When configuring mobile communication settings on the "Simple Settings" screen, the SIM must be set to **slot0**. Please note that if the SIM is not properly set to slot0 or set to slot1, the device will reboot due to the failsafe function. Click on "Simple Settings" on the side menu. ![](https://manual.amnimo.com/wp-content/uploads/2024/07/image-56.png) The "Simple Settings" screen appears. If you are using a mobile connection, select a registered carrier or subscription plan from "Carrier / Subscription Plan" in the Mobile Communications Settings. The "APN Name", "Account", "Password", and "Authentication Method" will be automatically set according to the selected carrier or subscription plan. **NOTE** - If the carrier/contract plan to be used is not registered in "Carrier/Contract Plan", select [Other]. - When using a SIM that does not require authentication, uncheck both "PAP" and "CHAP" in "Authentication Method". - Steps 1 and 2 are not required for the AR10-000JP (without communication module) model. ![](https://manual.amnimo.com/wp-content/uploads/2024/07/image-59.png) **WARNING** Incorrectly configured mobile settings may cause the compact router to reboot due to the failsafe feature. - When setting up, be sure to set the correct user name and password. - If the Compact Router repeatedly reboots, please refer to the following page. ⇒ ["Device repeatedly reboots](/?doc_category=デバイスが再起動を繰り返す) **NOTE** The mobile connection settings are also explained in the video on the following page. ⇒ ["Connecting your Amnemo device to the Internet](https://support.amnimo.com/hc/ja/articles/14653571455257-%E3%82%A2%E3%83%A0%E3%83%8B%E3%83%A2%E3%81%AE%E3%83%87%E3%83%90%E3%82%A4%E3%82%B9%E3%82%92%E3%82%A4%E3%83%B3%E3%82%BF%E3%83%BC%E3%83%8D%E3%83%83%E3%83%88%E3%81%AB%E6%8E%A5%E7%B6%9A%E3%81%99%E3%82%8B) Configure the interface settings according to the environment. **NOTE** Each device has a different interface name. When configuring the settings, please read each name differently. ![](https://manual.amnimo.com/wp-content/uploads/2024/07/400-1024x575.png) ❶ Configure the "ecm0" setting required for mobile connection. Click the toggle to enable or disable. Also check "Dynamic SNAT" if necessary. ❷ Configure the "eth0" setting required for WAN connection. Click the toggle to enable or disable. Select "DHCP Client" or "Fixed IP Address" as the method for assigning the "IP Address". If you select "Fixed IP Address", you will need to enter the "IP Address" and "Netmask". Also, check "Dynamic SNAT" if necessary. ❸ Configure the "br0" or "eth1" settings required for LAN connections. Click the toggle to enable or disable. Select "DHCP Client" or "Fixed IP Address" as the method for assigning the "IP Address". If you select "Fixed IP Address", you will need to enter the "IP Address" and "Netmask". Also, check "Dynamic SNAT" if necessary. Enter "User Name" and "Password" as credentials for the package repository. **NOTE** Package repository credentials should only be set if a firmware update is required. Please contact our support for authentication information (user name and password). ![](https://manual.amnimo.com/wp-content/uploads/2024/07/image-60.png) DMS Settings. Slide the toggle to enable or disable DMS. ![](https://manual.amnimo.com/wp-content/uploads/2024/07/image-61.png) Configure Nx Witness settings. Slide the toggle to enable or disable Nx Witness. **NOTE** If Nx Witness is set to enabled, set the "port number" and "password" as needed. ![](https://manual.amnimo.com/wp-content/uploads/2024/07/image-62.png) Scroll to the bottom of the screen and click Settings. ![](https://manual.amnimo.com/wp-content/uploads/2024/07/image-63.png) A confirmation screen for the settings will appear. ［Click Settings. ![](https://manual.amnimo.com/wp-content/uploads/2024/07/image-64.png) Settings are saved. Click [Operational Information] - [Mobile Communications] on the side menu to check the status of mobile communications. ![](https://manual.amnimo.com/wp-content/uploads/2024/07/image-65.png) | Communication module status | meaning | | --- | --- | | dialing | in the process of connecting | | connected | state of connectivity | | disconnected | disconnected state | **WARNING** If the connection is not correct, such as if there is an error in the mobile settings, the device may automatically reboot due to the fail-safe feature. Please be aware of this. **GUIのプロトコルとポート番号を変更するには** Select [Advanced/Control] - [GUI Settings] from the GUI side menu to change the protocol and port number used in the GUI settings. For details, please refer to the following ⇒ GUI User's Manual [, "Configuring GUI Settings".](/?doc_category=gui-setting)