---
title: Configure storage settings
description: "If you are using an edge gateway with SSD storage, you will need to configure the storage. This step describes the procedure to mount and make the storage available. **NOTE** For detailed storage settings, please refer to the following ⇒…"
url: "https://manual.amnimo.com/en/docs/step-3-configure-the-edge-gateway-en/configure-storage-settings-3/"
updated: "2025-12-03"
category: "AG-SG / step-3-configure the edge gateway"
---

# Configure storage settings

If you are using an edge gateway with SSD storage, you will need to configure the storage. This step describes the procedure to mount and make the storage available.

 **NOTE**

For detailed storage settings, please refer to the following
⇒ GUI User's Manual [, "Storage".](https://manual.amnimo.com/docs/gui-users-manual/system-settings-gui/%e3%82%b9%e3%83%88%e3%83%ac%e3%83%bc%e3%82%b8/)

   

### Adding partitions

Add a partition to be selected when configuring storage.

  From the side menu, click System Settings > Storage.

![](https://manual.amnimo.com/wp-content/uploads/2025/09/GU0805-01-1024x348.webp)

  On the "Partitions" tab, click "Add New".

![](https://manual.amnimo.com/wp-content/uploads/2025/10/GU0805-05-1024x314.webp)

The "Create Partition" screen appears.

  Select the storage on which you want to create partitions.

![](https://manual.amnimo.com/wp-content/uploads/2025/10/GU0805-06-1024x434.webp)

  Set the following basic partition information (1) to (3) and click Next.

Select a partition number in the range of 2 to 9.
(2) Select the partition type.
　Linux ... Linux standard partition type. It is set by default.　
　fat32 ... FAT32 (LBA) partition type.
(c) Enter the partition capacity in kilobytes.
　If omitted, the maximum value of the storage device will be used.

![](https://manual.amnimo.com/wp-content/uploads/2025/10/GU0805-07-1024x625.webp)

  Confirm the information you have entered and click \[Setup\].

![](https://manual.amnimo.com/wp-content/uploads/2025/10/GU0805-08-1024x500.webp)

  If the partition is successfully added, the following dialog appears
To move to the detail screen, click \[Transition\].

![](https://manual.amnimo.com/wp-content/uploads/2025/10/GU0805-09.webp)

  The "Partition Details" screen appears.

To format a partition, proceed as follows
⇒ GUI User's Manual ["Storage" **Formatting a partition**](https://manual.amnimo.com/docs/gui-users-manual/system-settings-gui/%E3%82%B9%E3%83%88%E3%83%AC%E3%83%BC%E3%82%B8/#%E3%83%91%E3%83%BC%E3%83%86%E3%82%A3%E3%82%B7%E3%83%A7%E3%83%B3%E3%82%92%E3%83%95%E3%82%A9%E3%83%BC%E3%83%9E%E3%83%83%E3%83%88%E3%81%99%E3%82%8B) Step 2

To mount the partition, proceed as follows
⇒ GUI User's Manual ["Storage" **Mounting a partition**](https://manual.amnimo.com/docs/gui-users-manual/system-settings-gui/%E3%82%B9%E3%83%88%E3%83%AC%E3%83%BC%E3%82%B8/#%E3%83%91%E3%83%BC%E3%83%86%E3%82%A3%E3%82%B7%E3%83%A7%E3%83%B3%E3%82%92%E3%83%9E%E3%82%A6%E3%83%B3%E3%83%88%E3%81%99%E3%82%8B) Step 2

![](https://manual.amnimo.com/wp-content/uploads/2025/10/GU0805-10-1024x534.webp)

### Add storage settings

Add storage settings.

  On the "Storage Settings" tab, click "Add New".

![](https://manual.amnimo.com/wp-content/uploads/2025/10/GU0805-20-1024x327.webp)

  Select a partition and click Next.

**[Adding partitions](https://manual.amnimo.com/?post_type=docs&p=24581#%E3%83%91%E3%83%BC%E3%83%86%E3%82%A3%E3%82%B7%E3%83%A7%E3%83%B3%E3%82%92%E8%BF%BD%E5%8A%A0%E3%81%99%E3%82%8B)** You can select a partition created in

![](https://manual.amnimo.com/wp-content/uploads/2025/10/GU0805-21-1024x405.webp)

  Set the following basic storage information (1) to (4) below and click \[Next\].

(1) Specify the mount point name. (Maximum 32 alphanumeric characters)
② Select the file system.
(3) Select the mount option.
Click the toggle button to enable or disable encryption.
　If encryption is enabled, set a password.

![](https://manual.amnimo.com/wp-content/uploads/2025/10/GU0805-22-1024x625.webp)

  For detailed information, set the following items (1) to (3) and click "Next".
\*Because this is an optional field, you can proceed to the next step even if you have not entered any information.

Click the toggle button to enable or disable FSCK processing.
　If "Confirm" is selected, only bad sectors are checked.
　［Selecting Auto Repair will repair minor errors.
Click the toggle to enable/disable the monitoring process.
Click the toggle to enable/disable fail-safe.
　If enabled, set the number of retries, interval, and number of restarts when the fsck/mount process fails.

![](https://manual.amnimo.com/wp-content/uploads/2025/10/GU0805-23-1024x727.webp)

  Confirm the information entered and click "Setup".

![](https://manual.amnimo.com/wp-content/uploads/2025/10/GU0805-24-1024x612.webp)

Additional storage settings will be added.