---
title: Configure PPP settings
description: "To connect to the Internet using PPP, configure the PPP connection settings. Please configure as necessary according to your environment. Click \\[Network\\] > \\[PPP (PPPoE)\\] on the side menu. ![](https://manual.amnimo.com/wp-content/uploads/2025/10/GU0703-01-1024x256.webp) ［Click Add New. ![](https://manual.amnimo.com/wp-content/uploads/2025/10/GU0703-04-1024x233.webp) The \"Add PPP (PPPoE) Configuration\" screen…"
url: "https://manual.amnimo.com/en/docs/step-3-configure-the-router-settings/configure-ppp-settings-2/"
updated: "2025-12-03"
category: "AC-SG / Step 3 Configure the router settings"
---

# Configure PPP settings

To connect to the Internet using PPP, configure the PPP connection settings. Please configure as necessary according to your environment.

  Click \[Network\] > \[PPP (PPPoE)\] on the side menu.

![](https://manual.amnimo.com/wp-content/uploads/2025/10/GU0703-01-1024x256.webp)

  ［Click Add New.

![](https://manual.amnimo.com/wp-content/uploads/2025/10/GU0703-04-1024x233.webp)

The "Add PPP (PPPoE) Configuration" screen appears.

  Set the following items (1) to (2) for the basic information of the PPP line, and click \[Next\].

Enter the PPP line name.
Select the message output level.

![](https://manual.amnimo.com/wp-content/uploads/2025/10/GU0703-05-1024x391.webp)

  Set the following items (1) to (2) for authentication information and click "Next".
\*Because this is an optional field, you can proceed to the next step even if you have not entered any information.

Select the authentication method.
Set a user name and password.

![](https://manual.amnimo.com/wp-content/uploads/2025/10/GU0703-06-1024x448.webp)

  Confirm the information entered and click "Setup".

![](https://manual.amnimo.com/wp-content/uploads/2025/10/GU0703-07-1024x452.webp)

Completes the addition of PPP ( PPPoE ) configuration.