---
title: Connect to terminal
description: "1. [Click Connect. ![](https://amnimo.com/manual/edge_gw/alpine/dms/ja/assets/images/image99.png) 2. Enter a user name and port number, then click Connect. - Enter a user name to log in to the device. (Usually, admin ) Port number is the SSH port number. ![](https://amnimo.com/manual/edge_gw/alpine/dms/ja/assets/images/image100.png) - When the…"
url: "https://manual.amnimo.com/en/docs/terminal-operations/connect-to-terminal/"
updated: "2024-06-27"
category: DMS / Terminal Operations
---

# Connect to terminal

1. [Click Connect.
   ![](https://amnimo.com/manual/edge_gw/alpine/dms/ja/assets/images/image99.png)
2. Enter a user name and port number, then click Connect.
   - Enter a user name to log in to the device. (Usually, admin ) Port number is the SSH port number.

   ![](https://amnimo.com/manual/edge_gw/alpine/dms/ja/assets/images/image100.png)

   - When the connection is complete, the display changes from "Connected" to "Connected" and then to the "Disconnect" button.
     ![](https://amnimo.com/manual/edge_gw/alpine/dms/ja/assets/images/image105.png) ➡ ![](https://amnimo.com/manual/edge_gw/alpine/dms/ja/assets/images/image104.png)

   - If for some reason the connection cannot be established after 3 minutes, the button display will change from [ Connecting ] to [ Disconnect ]. Clicking Disconnect at this point will return you to the Connection display so you can try to connect again.

   **precautions**
   If another user is making a terminal connection, the connection cannot be made and the following error message will appear **Connection to the device failed because another user is already connected.** If this message appears even though no other user is connected, follow the steps below to forcibly disconnect the other user.

   In the error message, click Details.
   ![](https://amnimo.com/manual/edge_gw/alpine/dms/ja/assets/images/image114.png)
   Click on [ Disconnect here ].
   ![](https://amnimo.com/manual/edge_gw/alpine/dms/ja/assets/images/image115.png)
   When a confirmation message appears, click Yes.
   ![](https://amnimo.com/manual/edge_gw/alpine/dms/ja/assets/images/image116.png)
3. If this is the first time connecting or the first time connecting after a firmware update, type " **yes** " and press Enter when the following message appears.
   ![](https://amnimo.com/manual/edge_gw/alpine/dms/ja/assets/images/image121.png)
4. The following screen will appear and you will be able to operate with the CLI. ![](https://amnimo.com/manual/edge_gw/alpine/dms/ja/assets/images/image274.png)Please refer to the following manual for specific CLI operations. ➡ " [CLI User's Manual](https://amnimo.com/manual/edge_gw/cli/ja/cli_users_manual.pdf)
   ![](https://amnimo.com/manual/edge_gw/alpine/dms/ja/assets/images/image118.png)
5. Once the connection is made, you can move to other tabs in the device edit screen while retaining the connection.
   ![](https://amnimo.com/manual/edge_gw/alpine/dms/ja/assets/images/image106.png)

 **メモ**

When moving from the sidebar to another page, the terminal connection is disconnected. When you click on the page you are moving to, the following confirmation screen will appear.![](https://amnimo.com/manual/edge_gw/alpine/dms/ja/assets/images/image107.png)