---
title: Create a report
description: "The reporting function allows you to create a report with the snapshots you have taken. (If you have applied for this service) **ALERT** The created report will not be saved on the Cloud Video Recorder. [If you click Cancel, you…"
url: "https://manual.amnimo.com/en/docs/useful-features-en/create-a-report-2/"
updated: "2024-07-23"
category: CVR / Useful Features
---

# Create a report

The reporting function allows you to create a report with the snapshots you have taken. (If you have applied for this service)

 **ALERT**

The created report will not be saved on the Cloud Video Recorder. [If you click Cancel, you will lose the information you have entered. If you wish to save the report, save it as a PDF from the Preview/Print menu or print it.

## **Generate a report of the most recently acquired thumbnails.**

1. On the camera of interest, click the ![](https://amnimo.com/manual/edge_gw/CloudVR/ja/assets/images/image164.png) icon and then click Report Generator.
   ![](https://amnimo.com/manual/edge_gw/CloudVR/ja/assets/images/image212.png)
2. A report will appear with the most recently retrieved thumbnail image automatically attached, enter the following
   (1) **Report title**: Provide a title for the report. (Up to 30 characters)
   (2) **Image comment**: Provide a comment on the image. (Maximum of 100 characters on 5 lines)
   (3) **Matters to be reported as a whole**: Provide a summary, etc. (maximum of 500 words on 10 lines) (within 10 lines, up to 500 characters)
   ![](https://amnimo.com/manual/edge_gw/CloudVR/ja/assets/images/image246.png)
3. [Click "Preview/Print" to open the preview/print screen using your browser's capabilities. From here you can save the report as a PDF or print it.
   ![](https://amnimo.com/manual/edge_gw/CloudVR/ja/assets/images/image110.png)

## **Adding Images to Reports**

Multiple images can be added for each camera. (Up to 10 images per camera)

1. On the report generation screen, click on [ +Attached Image ].
   ![](https://amnimo.com/manual/edge_gw/CloudVR/ja/assets/images/image238.png)
2. The acquired snapshots are displayed as shown in the figure below.
   ![](https://amnimo.com/manual/edge_gw/CloudVR/ja/assets/images/image248.png)
3. Images will be added as follows
   ![](https://amnimo.com/manual/edge_gw/CloudVR/ja/assets/images/image247.png)

## **Add another camera to the report**

Reports can include video acquired by multiple cameras (up to 20 cameras per report). (Up to 20 cameras per report)

1. Click "+Camera" on the report generation screen.
   ![](https://amnimo.com/manual/edge_gw/CloudVR/ja/assets/images/image243.png)
2. Select the name of the camera you wish to add from the list and click on it.
3. A camera is added as shown below.
   ![](https://amnimo.com/manual/edge_gw/CloudVR/ja/assets/images/image253.png)
4. You can also add other images for the added camera from [ + Attached Image ].

## **Delete images and cameras from reports**

Unwanted images and cameras can be deleted at any time from the Delete icon. *Deletion is done without warning.

### **To delete an image**

Click on the delete icon where it says X number of images attached.

![](https://amnimo.com/manual/edge_gw/CloudVR/ja/assets/images/image254.png)

### **To delete a camera**

Click on the delete icon where the camera name is mentioned.

![](https://amnimo.com/manual/edge_gw/CloudVR/ja/assets/images/image122.png)