---
title: Adding viewers and cameras to the video wall
description: "The video wall screen allows the user to view the camera image. ### Add a viewer The video wall can have a number of viewers based on the number of cameras. | Number of cameras | Maximum number of viewers…"
url: "https://manual.amnimo.com/en/docs/video-wall-setup-and-operation-en/adding-a-camera-to-the-video-wall-2/"
updated: "2026-01-29"
category: CVR / Video Wall Setup and Operation
---

# Adding viewers and cameras to the video wall

The video wall screen allows the user to view the camera image.

### Add a viewer

The video wall can have a number of viewers based on the number of cameras.

| Number of cameras | Maximum number of viewers |
| --- | --- |
| Less than 100 units | 5 |
| More than 100 units | 10 |

Open the Video Wall screen and click on ![](https://manual.amnimo.com/wp-content/uploads/2024/07/e19.png) on the screen.
Once the viewer is added, a tab will be added as \[ New Viewer \].

![](https://manual.amnimo.com/wp-content/uploads/2024/06/C1001-01-1024x342.png)

### Configure viewer settings (including adding cameras)

  If no cameras have been added to the viewer, the following screen will appear, click on the icon in the upper right corner of the screen and click on "Settings".

![](https://manual.amnimo.com/wp-content/uploads/2024/07/E1001-02-1-1024x475.png)

  \[ ビューアー名 \] にビューアーの名前を入力 (①) します。 " 表示しないカメラ " リストから表示したいカメラを選択し、 " 表示するカメラ " リストへドラッグするか、＋アイコンをクリックし (②)、保存します(③)。

Similarly, dragging a camera from "Show Cameras" to "Do Not Show Cameras" or clicking on the - icon will cause the image of the selected camera to disappear from the viewer.

![](https://manual.amnimo.com/wp-content/uploads/2025/04/E1001-03-1024x448.png)

- [カメラの並べ替え](#uagb-tabs__tab0)
- [カメラ名の表示](#uagb-tabs__tab1)
- [カメラ名を重ねて表示](#uagb-tabs__tab2)

The cameras to be displayed can be rearranged by dragging.
![](https://manual.amnimo.com/wp-content/uploads/2025/04/E1001-05.png)

Click the "Show Camera Name" toggle to display the camera name at the top of the viewer image.
![](https://manual.amnimo.com/wp-content/uploads/2025/04/E1001-06.png)

**When the camera name is displayed**
![](https://manual.amnimo.com/wp-content/uploads/2024/07/E1001-07.png)

Click on the "Show Camera Names" toggle to display the "Overlay Camera Names" toggle. Clicking on this toggle will display the camera name overlaid on the viewer image.
![](https://manual.amnimo.com/wp-content/uploads/2025/04/E1001-08.png)

**When the camera name is overlaid**
![](https://manual.amnimo.com/wp-content/uploads/2024/07/E1001-09.png)

    Verify that the added camera appears in the new viewer.

![](https://manual.amnimo.com/wp-content/uploads/2024/06/C1001-02-1024x342.png)