Table of Contents
This section describes how to update the apps installed on the IoT router.
Update the package with the command #
Since the IoT router is based on Ubuntu 18.04 LTS, each app can be updated from the apt repository using the package management system.
- For specific usage of the command, please refer to “2.5 Working with the Package Repository” in the CLI User’s Manual.
Note that the IoT router must be connected to the Internet when using the package management system.
Normally, a communication module is used to connect to the Internet via a mobile line, but it is also possible to connect via Ethernet.
The initial IP address setting on the eth0 side is fixed to the DHCP client. Please set it according to the network such as ONU (Optical Line Termination Unit) on the Internet side.
- For details on how to change the network, see “6.2 Configuring Interface Settings” in the CLI User’s Manual.
- For more information on mobile settings, please refer to “Chapter 5 Mobile Operations” in the CLI User’s Manual.
The following is an example of connecting to the Internet via eth0.
