Create a report

The reporting function allows you to create a report with the snapshots you have taken. (If you have applied for this service)

Generate a report of the most recently acquired thumbnails. #

1. On the camera of interest, click the icon and then click Report Generator.
   
   
2. A report will appear with the most recently retrieved thumbnail image automatically attached, enter the following
   (1) Report title: Provide a title for the report. (Up to 30 characters)
   (2) Image comment: Provide a comment on the image. (Maximum of 100 characters on 5 lines)
   (3) Matters to be reported as a whole : Provide a summary, etc. (maximum of 500 words on 10 lines) (within 10 lines, up to 500 characters)
   
3. [Click “Preview/Print” to open the preview/print screen using your browser’s capabilities. From here you can save the report as a PDF or print it.
   

Adding Images to Reports #

Multiple images can be added for each camera. (Up to 10 images per camera)

1. On the report generation screen, click on [ +Attached Image ].
   
   
2. The acquired snapshots are displayed as shown in the figure below.
   
   
3. Images will be added as follows
   

Add another camera to the report #

Reports can include video acquired by multiple cameras (up to 20 cameras per report). (Up to 20 cameras per report)

1. Click “+Camera” on the report generation screen.
   
   
2. Select the name of the camera you wish to add from the list and click on it.
   
3. A camera is added as shown below.
   
   
4. You can also add other images for the added camera from [ + Attached Image ].

Delete images and cameras from reports #

Unwanted images and cameras can be deleted at any time from the Delete icon. *Deletion is done without warning.

To delete an image #

Click on the delete icon where it says X number of images attached.

To delete a camera #

Click on the delete icon where the camera name is mentioned.