Configure DNS settings

Table of Contents

Configure DNS settings for this product.
This section describes operations such as enabling DNS settings, specifying port numbers, and adding a query server.

View DNS settings #

Displays DNS settings.

From the side menu, click Advanced Settings & Controls – DNS Settings.

The “DNS Settings” screen displays the registered DNS settings.

NOTE

You can sort the DNS settings in descending/ascending order for each item by clicking the “Address” and “Priority” tabs for the query server and local address of the DNS settings.

Configure DNS settings #

Configure DNS settings.

On the “DNS Settings” screen, set the following items (1) to (3) and click the “Configure” button.

Click the ❶ toggle to enable or disable DNS.
❷ Specify the port number.
❸ Select to enable or disable querying the root server.

This is applied by clicking on the [ Settings ] button.

Configure the query server settings. #

Select the “Query Server” tab and click Add New.

The “Add Contact Server” screen will appear.

Set the following items (1) to (2) and click the [ Settings ] button.

Specify the upper-level DNS server to query.
❷ Specify the priority as a number from 0 to 99, with 0 being the highest priority.

From the DNS Settings screen, you can edit or delete the configured query server.

Configure local address settings. #

Select the “Local Address” tab and click on “Add New”.

The “Add Local Address” screen appears.

Set the following items (1) to (3) and click the [ Setup ] button.

❶ Specifies the address to be responded to.
❷ Specifies the host name to respond to.
❸ Set the TTL value to be returned upon response, as a number between 10 and 2419200.

From the DNS Settings screen, you can edit or delete the local address you have set.

Configure local zone settings. #

Select the “Local Zones” tab and click on “Add New.

The “Add Local Zone” screen will appear.

Set the following ① to ② and click the [ Setup ] button.

❶ Enter any zone name.
Specify the type of ❷.

From the DNS Settings screen, you can edit or delete configured local zones.

Set up an alias definition. #

Select the “Alias Definition” tab and click Add New.

The “Add Alias Definition” screen appears.

Set the following items (1) to (3) and click the [ Setup ] button.

❶ Enter any domain name.
Specify the host name.
❸ Set the TTL value to be returned upon response, as a number between 10 and 2419200.

From the DNS Settings screen, you can edit or delete the alias definitions you have set.

What are your Feelings
Scroll to Top