接続機器の情報を確認する #
The Connected Devices tab allows you to check the link status of ports and edit and operate the following
There is no “Connected Devices” tab in the AC series. (Will be supported in the future.)
- Edit the description of each port
- Start/stop/reset PoE power supply (except when AR10 is used)
- Start/Stop/Reset USB power supply (except when using AR10/AR20)
(1) Update to the latest status: Update the status of each port to the latest status.
Port : Indicates the name of each port of the device.
Link Status : Indicates the status of each port.
| up (i.e. of a woman’s hair) | Linked up state |
| downstream | Link down state |
| unknown | State cannot be retrieved |
Power supply status : Indicates whether or not power is being supplied .
| ON | State of being supplied with power |
| OFF | Power is not supplied. |
| unknown | State cannot be retrieved |
ETH0 port of AG series is displayed as “Unknown” because it does not provide PoE power; AR10 is displayed as “Unknown” because all ports do not support PoE.
Description : Allows you to enter a description of the device connected to each port.
( 6 ) Action: The power supply of each port can be stopped or started.
| reset | After power supply is stopped, power supply is resumed after the specified time. |
| ON | Starts supplying power |
| OFF | Power supply is stopped |
