Compact router with wireless LAN (outdoor version)

Open the front cover of the compact router and remove the stopper at the top of the slot.

<Open the lid.

Insert the SIM card to be used into the slot.
The slot is preferentially used for SIM0.

<Open the lid.

Return the stopper to the top of the slot.

<Open the lid.

Connect the Ethernet port of the compact router to the PC using a LAN cable.

<Open the lid.

Connect the AC adapter to the compact router and turn on the power switch to activate it.
NOTE

There is no problem connecting the power supply before connecting the PC to the compact router. However, when connecting with terminal emulator software, a blank screen may appear. In that case, press the Enter key once. there is no problem even if the PC is turned on before connecting the AC adapter.

<Open the lid.

<Power supply section

自動起動機能に関する注意事項

Notes on the automatic startup function Compact routers are designed to operate 24 hours a day, so they are equipped with a function that automatically recovers after shutting down in the event of a failure, for example.

Therefore, if the compact router is shut down in the manner described in this section, but power is still supplied from the power connector, it will reboot.

If you want to put the compact router in a power-off state, shut it down and wait until the LED is in the power-off ready state (power LED lit red) before pulling the power plug.

What are your Feelings
Scroll to Top