Remove the front cover of the compact router and insert the SIM card to be used into the slot.
The slot is preferentially used for SIM0.
The slot is preferentially used for SIM0.
NOTE
Insert the SIM card so that its contacts are on the bottom side.
Connect the Ethernet port of the compact router to the PC using a LAN cable.
Connect the AC adapter to the compact router. The power will automatically turn on and the compact router will start up.
NOTE
- There is no problem connecting the power supply before connecting the PC to the compact router. However, when connecting with terminal emulator software, a blank screen may appear. If this happens, press the Enter key once.
- It does not matter if the PC is turned on before connecting the AC adapter.
自動起動機能に関する注意事項
Notes on the automatic startup function Compact routers are designed to operate 24 hours a day, so they are equipped with a function that automatically recovers after shutting down in the event of a failure, for example.
Therefore, if the compact router is shut down in the manner described in this section, but power is still supplied from the power connector, it will reboot.
If you want to put the compact router in a power-off state, shut it down and wait until the LED is in the power-off ready state (power LED lit red) before pulling the power plug.
