Table of Contents
This section describes the factory default settings of the compact router.
network #
Indoor Compact Router #
| (data) item | setting (of a computer or file, etc.) | |
| Interface (eth0) | ||
| Enable/Disable | validity | |
| IP address | 192.168.0.254/24 | |
| path MTU | automatic | |
| PPPoE(IPv4) | invalid | |
| DHCP Client (IPv4) | invalid | |
| gateway | unset | |
| MTU | 1500 | |
| link mode | 100BASE-T auto-recognition | |
| Proxy ARP*1 | invalid | |
| dynamic SNAT | invalid | |
| DHCP server (eth0) | ||
| Enable/Disable | invalid | |
Compact router with wireless LAN for indoor/outdoor use #
| setting (of a computer or file, etc.) | AC15-011JP-10 | AC25-011JP-21 | |
| Interface (br0) | |||
| Enable/Disable | validity | ||
| IP address | 192.168.0.254/24 | ||
| bridge interface | lan0, lan1, wlan0, wlan1 | lan0, lan1, wlan0 | |
| path MTU | automatic | ||
| PPPoE(IPv4) | invalid | ||
| DHCP Client (IPv4) | invalid | ||
| gateway | unset | ||
| MTU | 1500 | ||
| Proxy ARP*1 | invalid | ||
| dynamic SNAT | invalid | ||
| MAC address | lan0 | ||
| Interface (lan0,lan1) | |||
| Enable/Disable | validity | ||
| IP address | unset | ||
| path MTU | automatic | ||
| PPPoE(IPv4) | invalid | ||
| DHCP Client (IPv4) | invalid | ||
| gateway | unset | ||
| MTU | 1500 | ||
| link mode | 100BASE-T auto-recognition | ||
| Proxy ARP*1 | invalid | ||
| dynamic SNAT | invalid | ||
| Interface (wlan0) | |||
| Enable/Disable | validity | ||
| IP address | unset | ||
| path MTU | automatic | ||
| PPPoE(IPv4) | invalid | ||
| DHCP Client (IPv4) | invalid | ||
| gateway | unset | ||
| MTU | 1500 | ||
| Wireless LAN Access Point | amnimo-2G | ||
| Interface (wlan1) | |||
| Enable/Disable | validity | invalid | |
| IP address | unset | ||
| path MTU | automatic | ||
| PPPoE(IPv4) | invalid | ||
| DHCP Client (IPv4) | invalid | ||
| gateway | unset | ||
| MTU | 1500 | ||
| Wireless LAN Access Point | amnimo-5G | ||
| DHCP server (br0) | |||
| Enable/Disable | validity | ||
| address range | 192.16.0.32 – 192.16.0.63 | ||
| subnet mask | 255.255.255.0 | ||
| Lease period | 60 to 86400 seconds | ||
| DNS Server Notification Settings | automatic | ||
| NTP Server Notification Settings | automatic | ||
| Gateway Notification Settings | automatic | ||
| fail-safe | invalid | ||
| Wireless LAN function | |||
| wlan0 | |||
| Enable/Disable | validity | ||
| Setting name | amnimo-2G | ||
| Operation Mode | access point | ||
| SSID | amnimo-2g-xxxxxx*2*3 | ||
| frequency band | 2.4GHz | ||
| Channel Width | 20,40, 80MHz*4 | ||
| SSD Stealth | invalid | ||
| privacy separator | validity | ||
| security key | Random value*3 | ||
| Security Type | WPA2-PSK/WPA3-SAE authentication mixed mode (encryption: AES-CCMP )*5 | ||
| Maximum number of connections | Maximum number of connections: 10*6 | ||
| wlan1 | |||
| Enable/Disable | validity | invalid | |
| Setting name | amnimo-5G | ||
| Operation Mode | access point | ||
| SSID | amnimo-5g-xxxxxx*2*3 | ||
| frequency band | 5GHz | ||
| Channel Width | 20,40, 80MHz*4 | ||
| SSD Stealth | invalid | ||
| privacy separator | validity | ||
| security key | Random value*3 | ||
| Security Type | WPA2-PSK/WPA3-SAE | ||
| Authentication mixed mode | |||
| (Encryption: AES-CCMP )*5 | |||
| Maximum number of connections | Maximum number of connections: 10*6 | ||
2 The value is the 4th to 6th octet (vendor control number) of the second half of the device’s MAC address.
3 The nameplate of the device includes the WPS PIN in addition to the SSID and security key.
4 2.4GHz does not support 80MHz.
5 Specifications are from version 1.13.0.
6 The number of connections is the total number of 2.4GHz and 5GHz connections. The recommended maximum number of connections is 8.
Initial Account #
| (data) item | setting (of a computer or file, etc.) |
| ID | admin |
| (computer) password | No setting (set at first login) |
initial host name #
- amnimo
Server Settings #
| server | setting (of a computer or file, etc.) | |
| SSH Server | invalid | |
| DHCP Server | Indoor Compact Router with Wireless LAN: Disabled Indoor Compact Router with Wireless LAN: Enabled Outdoor type compact router with wireless LAN: Enabled → See ” Network ” for detailed contents. | |
| DNS Server | ||
| Enable/Disable | validity | |
| port number | 53 | |
| DNS Port Range | 1024 – 65535 | |
| log level | operational | |
| DNSSEC | invalid | |
| TTL at cache | 900-3600 sec. | |
| Negative cache maximum TTL | 900 sec. | |
| DNS Root Server Settings | validity | |
| NTP Server | invalid | |
| Syslog server (local storage) | ||
| Enable/Disable | validity | |
| log rotation size | 2048kbyte | |
| Number of generations of log rotation | 8 | |
| log level | informational | |
| Syslog server (forwarding) | invalid | |
| Device Management System Server | validity | |
| GUI (HTTP server) | ||
| Enable/Disable | validity | |
| protocol | Hypertext Transfer Protocol | |
| port number | 80 | |
| remote. it*. | invalid | |
| proxy server | invalid | |
This has been implemented since version 1.7.0.
packet filtering configuration #
input settings #
Default policy: Accept
Output setting #
Default policy: Accept
Transfer Settings #
Default policy: Accept
| index number | Port Number | protocol | Description. | From / To | setting (of a computer or file, etc.) | policy |
| 100 | 137, 138 | udp | NetBIOS Name Service NetBIOS Datagram Service | destination (of transmission) | transfer | drop |
| 110 | 137, 138 | udp | NetBIOS Name Service NetBIOS Datagram Service | sender | transfer | drop |
| 120 | 137 | tcp | NetBIOS Name Service | destination (of transmission) | transfer | drop |
| 130 | 137 | tcp | NetBIOS Name Service | sender | transfer | drop |
| 140 | 139 | tcp | NetBIOS Session Service | destination (of transmission) | transfer | drop |
| 150 | 139 | tcp | NetBIOS Session Service | sender | transfer | drop |
| 160 | 445 | tcp | Direct Hosting of SMB | destination (of transmission) | transfer | drop |
| 170 | 445 | tcp | Direct Hosting of SMB | sender | transfer | drop |
static routing #
unset
Mobile Function #
unset
Schedule setting #
unset
time zone #
- UTC
IPsec #
unset
DHCP Relay #
unset
