Accessories we sell (sold separately)

When configured as described in this manual, the following optional accessories must be provided.

CAUTION

Optional items are not included in the Edge Gateway’s warranty coverage.

    Edge gateway (indoor version) (AG10) #

    name of productfigurePart NumberSpecifications and Remarks
    AC adapter (24 VDC/2A)M7901YADC24V/2A, 30W load, 60°C environment
    AC adapter (DC12V/1A)M7901YCDC12V/1A, 6W load, 60°C environment
    rod antennaM7901YDset of two
    External AntennaM7901YECable length 2.5m, set of 2
    GPS AntennaM7901YPCable length 5m
    with magnet
    (only compatible frequency GPS)
    Main body fixing metal fittingsM7901YJWith body fixing screw
    console conversionM7901YGRJ-45 – D-Sub 9-pin
    DC power cableM7901YKPower connector single end untreated cable
    rubber feetM7901YHSet of 4

    Edge gateway (outdoor version) (AG20) #

    name of productfigurePart NumberSpecifications and Remarks
    Rainproof AC cableM7901YV5m
    with round crimp terminals
    OD 9.15mm
    Cable gland (for Ethernet cable)M7901YQApplicable wire diameter
    6 to 10 mm
    Cable ground (for power supply only)M7901YRApplicable wire diameter
    8 to 14 mm
    Cable gland (for Ethernet cable)M7901YYApplicable wire diameter
    4 to 6.6 mm
    Cable gland (for 2 Ether cables)M7901YZApplicable wire diameter
    4.3 to 6.1 mm
    Wall Mounting BracketM7901YXStainless steel 4 sets
    Ball Mounting BracketM7901YWStainless steel 2 sets
    Ball Mounting BandM7901YUStainless steel Compatible pole/con pillar diameter: 60 to 400 mm
    NOTE
    • The Edge Gateway (outdoor version) uses BCPK203015S manufactured by Takachi-Electric Industry for the enclosure. Genuine Takachi Denki Kogyo products that are compatible with the said chassis can be used.
    • For PF pipe connectors, Furukawa Electric’s PFS-16BKSR-1 (waterproof PF pipe connector IPX5), Mirai Kogyo’s FPK-!6YPS (waterproof PF pipe connector IPX7) and similar products are available.

    Scroll to Top