Table of Contents
When configured as described in this manual, the following optional accessories must be provided.
CAUTION
Separately sold products are not included in the warranty coverage of the IoT Router.
- Please refer to the IoT Router User’s Manual for specifications and standards.
IoT Router Indoor Type (AR10) #
| name of product | figure | Part Number | Specifications and Remarks |
| AC adapter (DC12V/1A) |  | M7901YL | DC12V/1A 1 piece |
| rod antenna |  | M7901YD | For 3G/LTE/WiMAX 2 pcs. |
| External Antenna |  | M7901YE | Coaxial cable length 2.5m Antenna section with magnet 2 pcs. |
| DC power cable |  | M7901YM | Power connector one end treatment 1 pc |
| rubber feet |  | M7901YH | Set of 4 |
IoT Router Outdoor Type (AR20) #
| name of product | figure | Part Number | Specifications and Remarks |
| Rainproof AC cable |  | M7901YV | 5m with round crimp terminal OD 9.15mm 1 pc |
| Cable gland (for Ether cable) |  | M7901YQ | Applicable wire diameter 6 to 10 mm 1 piece |
| Cable gland (for power cable) | | M7901YR | Applicable wire diameter 8-14mm 1 piece |
| Cable gland (for Ether cable) | | M7901YY | Applicable wire diameter 4 to 6.6mm 1 piece |
| Cable gland (for 2 Ether cables) | | M7901YZ | Applicable wire diameter 4.3 to 6.1mm 1 piece |
| Wall Mounting Bracket |  | M7901YS | Made of stainless steel 4 pcs. of body 4 pcs. of accessory mounting screws |
| Ball Mounting Bracket |  | M7901YT | Made of stainless steel Compatible pole/con pillar diameter 60-400 mm 2 pcs. of body 4 pcs. of attached mounting screws |
| Ball Mounting Band |  | M7901YU | Stainless steel Applicable pole/con pillar diameter 60-400 mm 2 pcs. |
NOTE
For PF pipe connectors, Furukawa Electric’s PFS-16BKSR-1 (waterproof PF pipe connector IPX5), Mirai Kogyo’s FPK-16YPS (waterproof PF pipe connector IPX7) and similar products are available.
