Table of Contents
Prepare to install an edge gateway.
Check the bundle #
Main unit and accessories #
Edge gateway (indoor version)
The Edge Gateway (indoor version) includes the following
| included thing | figure | Part Number | Specifications and Remarks |
|---|---|---|---|
| Edge Gateway (Indoor version) Main unit |  | ||
| Before use |  | IM AMD03A01-11JA | A4, folded in two |
| rubber feet |  | M7901YH | Set of 4 |
Edge gateway (outdoor version)
The Edge Gateway (outdoor version) includes the following
| name of product | figure | Part Number | Specifications and Remarks |
| Edge Gateway (outdoor version) main unit |  | ||
| Before use |  | IM AMD03A02-11JA | A4, folded in two |
| grommet |  | 2 pcs (with main unit installed) | |
| strapping band |  | two (long cylindrical things) | |
| key |  | two (long cylindrical things) | |
| Terminal Cap |  | 3 pcs (with main unit installed) |
Accessories sold separately #
Edge gateway (indoor version)
Optional accessories for the Edge Gateway (indoor version) include
| name of product | figure | Part Number | Specifications and Remarks |
| AC adapter (24 VDC/2A) |  | M7901YA | DC24V/2A 30W load 60°C environment AC adapter + AC power cable 1 pair |
| AC adapter (DC12V/1A) |  | M7901YC | DC12V/1A 6W load 60°C environment 1 pc |
| rod antenna |  | M7901YD | For 3G/LTE/WiMAX 2 pcs. |
| External antenna (2.5m) |  | M7901YE | Coaxial cable length 2.5 m (gray) Antenna section with magnet 2 pcs. |
| External antenna (5m) | | M7901ZL | Coaxial cable length 5m (black) Antenna section with magnet 2 pcs. |
| GPS Antenna |  | M7901YP | Cable length 5m with magnet (only compatible frequency GPS) 1 cable |
| Main body fixing metal fittings |  | M7901YJ | 1 main unit 4 fixing screws |
| console conversion |  | M7901YG | RJ-45 – D-Sub 9-pin 1 pc |
| DC power cable |  | M7901YK | Power connector one end untreated Cable length 1m 1 piece |
CAUTION
- Accessories sold separately are not included in the Edge Gateway warranty coverage.
- The main unit fixing bracket must be attached to the main unit of the Edge Gateway (indoor version) using the supplied fixing screws.
- Please prepare the screws for fixing the main unit to the wall by yourself.
Edge gateway (outdoor version)
Accessories sold separately for the Edge Gateway (outdoor version) include
| name of product | figure | Part Number | Specifications and Remarks |
| Rainproof AC cable |  | M7901YV | 5m with round crimp terminal OD 9.15mm 1 pc |
| Cable gland (for Ether cable) |  | M7901YQ | Applicable wire diameter 6 to 10 mm 1 piece |
| Cable gland (for power cable) |  | M7901YR | Applicable wire diameter 8-14mm 1 piece |
| Cable gland (for Ether cable) |  | M7901YY | Applicable wire diameter 4 to 6.6mm 1 piece |
| Cable gland (for 2 Ether cables) |  | M7901YZ | Applicable wire diameter 4.3 to 6.1mm 1 piece |
| Wall Mounting Bracket |  | M7901YX | Made of stainless steel 4 pcs. of body 4 pcs. of accessory mounting screws |
| Ball Mounting Bracket |  | M7901YW | Made of stainless steel Compatible pole/con pillar diameter 60-400 mm 2 pcs. of body 4 pcs. of attached mounting screws |
| Ball Mounting Band |  | M7901YU | Stainless steel Applicable pole/con pillar diameter 60-400 mm 2 pcs. |
CAUTION
Accessories sold separately are not included in the Edge Gateway warranty coverage.
NOTE
- The Edge Gateway (outdoor version) uses BCPK203015S manufactured by Takachi-Electric Industry for the enclosure. Genuine Takachi Denki Kogyo products that are compatible with the said chassis can be used.
- For PF pipe connectors, Furukawa Electric’s PFS-16BKSR-1 (waterproof PF pipe connector IPX5), Mirai Kogyo’s FPK-!6YPS (waterproof PF pipe connector IPX7) and similar products are available.
Prepare in advance #
If necessary, please prepare the following items in advance
Edge gateway (indoor version)
- RJ45 LAN cable (straight cable of 1m or less in length)
- Serial console (PC or equivalent device with 9-pin D-sub connector)
NOTE
When using a device without a 9-pin D-sub connector, such as a notebook computer, prepare a USB-to-serial conversion cable.
- RJ-45/D-sub 9-pin conversion adapter (cross)
Edge gateway (outdoor version)
- USB Type-C cable (USB 2.0 standard, length of 2 m or less recommended)
- Serial console (PC or equivalent device with USB port)
NOTE
Match the shape of the USB Type-C cable’s serial console side to the shape of the USB port connector that the serial console has.
