Prepare the IoT router for installation.
Check the bundle #
Main unit and accessories #
IoT Router (indoor version)
| included thing | figure | Part Number | Specifications and Remarks |
|---|---|---|---|
| IoT Router (indoor version) Body |  | ||
| Before use |  | IM AMD04A01-11JA | A4, folded in two |
| rubber feet |  | M7901YH | Set of 4 |
IoT Router (outdoor version)
The IoT Router (outdoor version) includes the following
| name of product | figure | Part Number | Specifications and Remarks |
| IoT Router (outdoor version) Body |  | ||
| Before use |  | IM AMD04A02-11JA | A4, folded in two |
| grommet |  | 2 pcs (with main unit installed) | |
| key |  | two (long cylindrical things) | |
| Terminal Cap |  | 3 pcs (with main unit installed) |
Accessories sold separately #
IoT Router (indoor version)
Optional accessories for the IoT Router (indoor version) include
| name of product | figure | Part Number | Specifications and Remarks |
| AC adapter (DC12V/1A) |  | M7901YL | DC12V/1A 1 piece |
| rod antenna |  | M7901YD | For 3G/LTE/WiMAX 2 pcs. |
| External Antenna |  | M7901YE | Coaxial cable length 2.5m Antenna section with magnet 2 pcs. |
| DC power cable |  | M7901YM | Power connector one end treatment 1 pc |
| rubber feet |  | M7901YN | Set of 4 |
Accessories sold separately are not included in the warranty coverage of the IoT router.
IoT Router (outdoor version)
Accessories sold separately for the IoT Router (outdoor version) include
| name of product | figure | Part Number | Specifications and Remarks |
| Rainproof AC cable |  | M7901YV | 5m with round crimp terminal OD 9.15mm 1 pc |
| Cable gland (for Ether cable) |  | M7901YQ | Applicable wire diameter 6 to 10 mm 1 piece |
| Cable gland (for power cable) | | M7901YR | Applicable wire diameter 8-14mm 1 piece |
| Cable gland (for Ether cable) | | M7901YY | Applicable wire diameter 4 to 6.6mm 1 piece |
| Cable gland (for 2 Ether cables) | | M7901YZ | Applicable wire diameter 4.3 to 6.1mm 1 piece |
| Wall Mounting Bracket |  | M7901YS | Made of stainless steel 4 pcs. of body 4 pcs. of accessory mounting screws |
| Ball Mounting Bracket |  | M7901YT | Made of stainless steel Compatible pole/con pillar diameter 60-400 mm 2 pcs. of body 4 pcs. of attached mounting screws |
| Ball Mounting Band |  | M7901YU | Stainless steel Applicable pole/con pillar diameter 60-400 mm 2 pcs. |
Accessories sold separately are not included in the warranty coverage of the IoT router.
For PF pipe connectors, Furukawa Electric’s PFS-16BKSR-1 (waterproof PF pipe connector IPX5), Mirai Kogyo’s FPK-16YPS (waterproof PF pipe connector IPX7) and similar products are available.
Prepare in advance #
If necessary, please prepare the following items in advance
- USB Type-C cable (USB 2.0 standard, length of 2m or less recommended)
- Serial console (PC or equivalent device with USB port)
Match the shape of the USB Type-C cable’s serial console side to the shape of the USB port connector that the serial console has.
