When configured as described in this manual, the following optional accessories must be provided.
NOTE
Optional items are not included in the warranty coverage of the AI Edge Gateway.
- Please refer to the amnimo X Series AI Edge Gateway User’s Manual for specifications and standards.
AI Edge Gateway (indoor version) (AX11) #
name of product | figure | Part Number | Specifications and Remarks |
AC adapter (DC24V/2A) | M7901YA | DC24V/2A 30W load 60°C environment AC adapter + AC power cable 1 pair | |
AC adapter (DC12V/1A) | M7901YC | DC12V/1A 6W load 60°C environment 1 pc | |
rod antenna | M7901YD | For 3G/LTE/WiMAX 2 pcs. | |
External Antenna | M7901YE | Coaxial cable length 2.5m Antenna section with magnet 2 pcs. | |
GPS Antenna | M7901YP | Cable length 5m with magnet (only compatible frequency GPS) 1 cable | |
Main body fixing metal fittings | M7901YJ | 1 main unit 4 fixing screws | |
console conversion | M7901YG | RJ-45 – D-Sub 9-pin 1 pc | |
DC power cable | M7901YK | Power connector one end untreated Cable length 1m 1 piece | |
rubber feet | M7901YH | Set of 4 |
AI Edge Gateway (outdoor version) (AX21) #
name of product | figure | Part Number | Specifications and Remarks |
Rainproof AC cable | M7901YV | 5m with round crimp terminal OD 9.15mm 1 pc | |
Cable gland (for Ether cable) | M7901YQ | Applicable wire diameter 6 to 10 mm 1 piece | |
Cable gland (power supply only) | M7901YR | Applicable wire diameter 8-14mm 1 piece | |
Cable gland (for Ether cable) | M7901YY | Applicable wire diameter 4 to 6.6mm 1 piece | |
Cable gland (for 2 Ether cables) | M7901YZ | Applicable wire diameter 4.3 to 6.1mm 1 piece | |
Wall Mounting Bracket | M7901YX | Made of stainless steel 4 pcs. of body 4 pcs. of accessory mounting screws | |
Ball Mounting Bracket | M7901YW | Made of stainless steel Compatible pole/con pillar diameter 60-400 mm 2 pcs. of body 4 pcs. of attached mounting screws | |
Ball Mounting Band | M7901YU | Stainless steel Applicable pole/con pillar diameter 60-400 mm 2 pcs. |
NOTE
- AI Edge Gateway (outdoor version) uses BCPK203015S manufactured by TAKACHI ELECTRIC INDUSTRY CO. Genuine Takachi Denki Kogyo products that are compatible with the said chassis can be used.
- For PF pipe connectors, Furukawa Electric’s PFS-16BKSR-1 (waterproof PF pipe connector IPX5), Mirai Kogyo’s FPK-!6YPS (waterproof PF pipe connector IPX7) and similar products are available.