View Categories

Install an AI Edge Gateway

Prepare to install an AI edge gateway.

Check the bundle #

Main unit and accessories #

AI Edge Gateway (indoor version)

The AI Edge Gateway (indoor version) includes the following

name of productfigurePart NumberSpecifications and Remarks
AI Edge Gateway
(Indoor version) Main unit
Before useIM AMD07A01-13JAA4, folded in two
rubber feetM7901YH4 pieces

AI Edge Gateway (outdoor version)

The AI Edge Gateway (Outdoor Edition) includes the following

name of productfigurePart NumberSpecifications and Remarks
AI Edge Gateway
(outdoor version) main unit
  
Before useIM AMD07A01-11JAA4, folded in two
grommet 2 pcs
(Main unit already installed)
strapping band two (long cylindrical things)
key two (long cylindrical things)
Terminal Cap 3 pcs
(Main unit already installed)

Accessories sold separately #

AI Edge Gateway (indoor version)

Optional accessories for the AI Edge Gateway (indoor version) include

name of productfigurePart NumberSpecifications and Remarks
AC adapter (DC24V/2A)M7901YADC24V/2A
30W load
60°C environment
AC adapter + AC power cable
1 pair
AC adapter (DC12V/1A)M7901YCDC12V/1A
6W load
60°C environment
1 pc
rod antennaM7901YDFor 3G/LTE/WiMAX
2 pcs.
External AntennaM7901YECoaxial cable length 2.5m
Antenna section with magnet
2 pcs.
GPS AntennaM7901YPCable length 5m
with magnet
(only compatible frequency GPS)
1 cable
Main body fixing metal fittingsM7901YJ1 main unit
4 fixing screws
console conversionM7901YGRJ-45 – D-Sub 9-pin
1 pc
DC power cableM7901YKPower connector one end untreated
Cable length 1m
1 piece
rubber feetM7901YHSet of 4
CAUTION

Accessories sold separately are not included in the AI Edge Gateway warranty coverage.

AI Edge Gateway (outdoor version)

Optional accessories for the AI Edge Gateway (indoor version) include

name of productfigurePart NumberSpecifications and Remarks
Rainproof AC cableM7901YV5m
with round crimp terminal
OD 9.15mm
1 pc
Cable gland
(for Ethernet cable)
M7901YQApplicable wire diameter 6 to 10 mm
1 piece
Cable gland
(power supply only)
M7901YRApplicable wire diameter 8-14mm
1 piece
Cable gland
(for Ethernet cable)
M7901YYApplicable wire diameter 4 to 6.6mm
1 piece
Cable gland
(for 2 Ether cables)
M7901YZApplicable wire diameter 4.3 to 6.1mm
1 piece
Wall Mounting BracketM7901YXMade of stainless steel
4 pcs. of body
4 pcs. of accessory mounting screws
Ball Mounting BracketM7901YWMade of stainless steel
Compatible pole/con pillar diameter 60-400 mm
2 pcs. of body
4 pcs. of attached mounting screws
Ball Mounting BandM7901YUStainless steel
Applicable pole/con pillar diameter 60-400 mm
2 pcs.
CAUTION

Accessories sold separately are not included in the AI Edge Gateway warranty coverage.

NOTE
  • AI Edge Gateway (outdoor version) uses BCPK203015S manufactured by TAKACHI ELECTRIC INDUSTRY CO. Genuine Takachi Denki Kogyo products that are compatible with the said chassis can be used.
  • For PF pipe connectors, Furukawa Electric’s PFS-16BKSR-1 (waterproof PF pipe connector IPX5), Mirai Kogyo’s FPK-!6YPS (waterproof PF pipe connector IPX7) and similar products are available.

Prepare in advance #

If necessary, please prepare the following items in advance

AI Edge Gateway (indoor version)

  • RJ45 LAN cable (straight cable of 1m or less in length)
  • Serial console (PC or equivalent device with 9-pin D-sub connector)
NOTE

When using a device without a 9-pin D-sub connector, such as a notebook computer, prepare a USB-to-serial conversion cable.

  • RJ-45/D-sub 9-pin conversion adapter (cross)

AI Edge Gateway (outdoor version)

  • USB Type-C cable (USB 2.0 standard, length of 2 m or less recommended)
  • Serial console (PC or equivalent device with USB port)
NOTE

Match the shape of the USB Type-C cable’s serial console side to the shape of the USB port connector that the serial console has.

Scroll to Top