View Categories

About factory default settings

This section describes the factory default settings for the AI Edge Gateway.

network #

wan0: dhcpv4
lan0:
lan1:
lan2:
lan3:
br0: 192.168.0.254/24
– lan0/lan1/lan2/lan3

Initial Account #

  • ID: admin
  • PW: No setting (set at first login)

initial host name #

  • amnimo

Server Settings #

serversetting (of a computer or file, etc.)
SSH Serverinvalid
DHCP Serverinvalid
DNS Servervalidity
IPsecinvalid
NTP Serverinvalid
Syslog server (local storage)validity
Syslog server (forwarding)invalid
NxWtiness Servervalidity
Device Management System Servervalidity
GUI (HTTP server)Valid*.
remote.itinvalid

PoE Configuration #

All ports are configured as follows

  • Power supply: Enabled
  • Startup delay time: 0 sec.
  • Current limit: auto

packet filtering configuration #

index numberPort No.protocolDescription.From / Tosetting (of a computer or file, etc.)policy
100137, 138udpNetBIOS Name Service
NetBIOS Datagram Service
destination (of transmission)transferdrop
110137, 138udpNetBIOS Name Service
NetBIOS Datagram Service
sendertransferdrop
120137tcpNetBIOS Name Servicedestination (of transmission)transferdrop
130137tcpNetBIOS Name Servicesendertransferdrop
140139tcpNetBIOS Session Servicedestination (of transmission)transferdrop
150139tcpNetBIOS Session Servicesendertransferdrop
160445tcpDirect Hosting of SMBdestination (of transmission)transferdrop
170445tcpDirect Hosting of SMBsendertransferdrop
Scroll to Top