Table of Contents
Sensor connection gateway specifications are described for each hardware and software.
Hardware Specifications #
| Category | AX30-A70JP-10 | AX30-B70JP-10 | |
|---|---|---|---|
| CPU | Renesas RZ/V2L | ||
| CPU Core | ARM Cortex-A55 1.2GHz (2 cores) | ||
| Peripheral IP | DRP-AI (AI Accelerator) | ||
| RAM | 2Gbyte | ||
| eMMC | 64Gbyte | ||
| Mobile line*1 | LTE (Cat4), WCDMA (Japan) | ||
| LTE (FDD) | B1, B3, B8, B18, B19, B21 | ||
| LTE (TDD) | - | ||
| WCDMA (including HSUPA) | B1, B6, B8, B19 | ||
| Antenna terminal | |||
| mobile | SMA for 3G/4G x 2 | ||
| PoE power supply | IEEE 802.3af (max. 15.4W) | No PoE power supply | |
| interface | |||
| Ethernet | 10BASE-T/100BASE-TX/1000BASE-T x 2 ports (only LAN1 supports PoE) RJ-45 connector | 10BASE-T/100BASE-TX/1000BASE-T x 2 ports RJ-45 connector | |
| RS-485 | Dedicated terminal block x 2 ports | ||
| (computer) console | USB Type C x 1 port | ||
| USB | USB2.0 Type A x 1 port | ||
| SIM Slot | Micro SIM (3FF) x 2 slots, eSIM x 2 *2 | ||
| drug information | 4 Ports | ||
| DO | 1 port | ||
| AIN | 2 ports | ||
| 4-20mA input x 2 ports | PT100 input x 1 port Solar radiation meter input x 1 port | ||
| switch | PUSH | 1 (for shutdown and factory defaults) | |
| DIP | 2 (for setting) | ||
| LED | 2-color LED (PWR, ANT, MOB, ST) | ||
| Size | 202(W) × 109.7(D) × 38.2(H) mm (not including projections) | ||
| weight | Approx. 410g | Approx. 400g | |
| Supply voltage | 10.8VDC (12VDC-10%) to 32VDC (24VDC+20%) | ||
| Power consumption | Max. 20 W (including PoE 15.4 W) Absolute maximum rating 24 W | 5W max. Absolute maximum rating 10W | |
| Operating temperature | -20°C to 60°C | ||
| Storage temperature | -20°C to 70°C | ||
| Relative humidity | 10 to %～90% (no condensation) | ||
2 Please consult with us if you are considering using eSIM.
Software Specifications #
| Category | Description. | |
| kernel | Linux (5.10) | |
| OS | Ubuntu 24.04 LTS | |
| basic protocol | ARP/IPv4/UDP/TCP | |
| connection protocol | IPCP/PPP/PPP/PPPoE | |
| dynamic IP address | DHCP Server/Client (IPv4) DHCP server can be configured for each interface. | |
| Domain Name Resolution | DNS Relay/Client | |
| routing | static routing | |
| Address translation and port translation | NAT/NAPT (Destination/NAPT) | |
| VPN | IPsec/remote.it (standard installation) | |
| Time Synchronization | NTP | |
| security | packet filter | |
| application management | ||
| Configuration | amsh CLI (Command Line Interface) for amnimo Edge Gateway Series ● amnimo GUI GUI (Graphical User Interface) for amnimo Edge Gateway Series Configuration via Web browser | |
| Firmware update | Differential/whole update available via amsh and amnimo GUI | |
| log management | syslog | |
| Device Management System | amnimo DMS (Device Management System) | |
| development toolchain | ● gcc-13 13.2.0-23ubuntu4 ● binutils 2.42-4ubuntu2.3 | |
